lkml.org 
[lkml]   [2021]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: earlyprintk=xdbc seems broken
On Mon, Dec 20, 2021 at 04:34:13PM +0200, Mathias Nyman wrote:
> On 17.12.2021 15.55, Peter Zijlstra wrote:
> > On Fri, Dec 17, 2021 at 01:01:43PM +0200, Mathias Nyman wrote:
> >> I can reproduce this.
> >> Looks like problems started when driver converted to readl_poll_timeout_atomic() in:
> >>
> >> 796eed4b2342 usb: early: convert to readl_poll_timeout_atomic()
> >
> > I can confirm, reverting that solves the boot hang, things aren't quite
> > working for me though.
> >
> >> Seems to hang when read_poll_timeout_atomic() calls ktime_* functions.
> >> Maybe it's too early for ktime.
> >
> > It certainly is, using ktime for delay loops sounds daft to me anyhow.
> >
> >> After reverting that patch it works again for me.
> >
> > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-rc3+ root=UUID=a652986c-fbc6-4341-85c3-b4ad4402f130 ro debug ignore_loglevel sysrq_always_enabled usbcore.autosuspend=-1 earlyprintk=xdbc force_early_printk sched_verbose ftrace=nop mitigations=off nokaslr
> > ...
> > [ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 0
> > ...
> > [ 3.161367] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
>
> Ok, this is some other issue. I got the boot messages over USB
> (running minicom at the other end, listening to ttyUSB0)

I have a regular A->A USB3 cable, not the special one with a wire
missing. Given the dbc thing works, I feel this ought to work too.

> > The machine does boot.. but I *am* getting tons of:
> >
> > [ 485.546898] usb usb4-port4: Cannot enable. Maybe the USB cable is bad?
> > [ 485.546963] usb usb4-port4: config error
>
> This is expected when xhci driver takes over after the early dbc driver,
> xhci driver resets xHC controller, and all ports turn to normal host ports again.
>
> Because of the special cable you now have two hosts connected to each other,
> both trying to enumerate a device.
>
> This whole transition from earlyprintk xdbc to normal xhci driver is
> not very userfriendly.

Uhhmm... but but that shouldn't be. What if I want to keep using xdbc as
console after that point? specifically, I'll probably end up having:

earlyprintk=xdbc,keep

once all this starts working. The whole point of early consoles is that
they're more reliable than regular consoles, not that they're 'early'.

> > However, when I do:
> >
> > $ echo enable > /sys/bus/pci/devices/0000:00:14.0/dbc
> >
>
> Yes, this works as it turns on the DbC feature on in xHC hardware,
> which turns the first USB port into a usb device.

But if this works, why isn't earlyprintk working for me?

\
 
 \ /
  Last update: 2021-12-20 16:52    [W:0.304 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site