lkml.org 
[lkml]   [2021]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PM: runtime: Allow rpm_resume() to succeed when runtime PM is disabled
On Wed, 1 Dec 2021 at 21:11, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>
> On Wednesday, December 1, 2021 6:44:08 PM CET Rafael J. Wysocki wrote:
> > On Wed, Dec 1, 2021 at 4:23 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > >
> > > On Wed, 1 Dec 2021 at 14:49, Rafael J. Wysocki <rafael@kernel.org> wrote:
> > > >
> > > > On Wed, Dec 1, 2021 at 10:02 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > > >
> > > > > On Tue, 30 Nov 2021 at 18:26, Rafael J. Wysocki <rafael@kernel.org> wrote:
> > > > > >
> > > > > > On Tue, Nov 30, 2021 at 5:41 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > > > > >
> > > > > > > On Tue, 30 Nov 2021 at 14:02, Rafael J. Wysocki <rafael@kernel.org> wrote:
> > > > > > > >
> > > > > > > > On Tue, Nov 30, 2021 at 12:58 PM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > > > > > > >
> > > > > > > > > [...]
> > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Am I thinking correctly that this is mostly about working around the
> > > > > > > > > > > > > > > limitations of pm_runtime_force_suspend()?
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > No, this isn't related at all.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > The cpuidle-psci driver doesn't have PM callbacks, thus using
> > > > > > > > > > > > > > pm_runtime_force_suspend() would not work here.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Just wanted to send a ping on this to see if we can come to a
> > > > > > > > > > > > > conclusion. Or maybe we did? :-)
> > > > > > > > > > > > >
> > > > > > > > > > > > > I think in the end, what slightly bothers me, is that the behavior is
> > > > > > > > > > > > > a bit inconsistent. Although, maybe it's the best we can do.
> > > > > > > > > > > >
> > > > > > > > > > > > I've been thinking about this and it looks like we can do better, but
> > > > > > > > > > > > instead of talking about this I'd rather send a patch.
> > > > > > > > > > >
> > > > > > > > > > > Alright.
> > > > > > > > > > >
> > > > > > > > > > > I was thinking along the lines of make similar changes for
> > > > > > > > > > > rpm_idle|suspend(). That would make the behaviour even more
> > > > > > > > > > > consistent, I think.
> > > > > > > > > > >
> > > > > > > > > > > Perhaps that's what you have in mind? :-)
> > > > > > > > > >
> > > > > > > > > > Well, not exactly.
> > > > > > > > > >
> > > > > > > > > > The idea is to add another counter (called restrain_depth in the patch)
> > > > > > > > > > to prevent rpm_resume() from running the callback when that is potentially
> > > > > > > > > > problematic. With that, it is possible to actually distinguish devices
> > > > > > > > > > with PM-runtime enabled and it allows the PM-runtime status to be checked
> > > > > > > > > > when it is still known to be meaningful.
> > > > > > > > >
> > > > > > > > > Hmm, I don't quite understand the benefit of introducing a new flag
> > > > > > > > > for this. rpm_resume() already checks the disable_depth to understand
> > > > > > > > > when it's safe to invoke the callback. Maybe there is a reason why
> > > > > > > > > that isn't sufficient?
> > > > > > > >
> > > > > > > > The problem is that disable_depth > 0 may very well mean that runtime
> > > > > > > > PM has not been enabled at all for the given device which IMO is a
> > > > > > > > problem.
> > > > > > > >
> > > > > > > > As it stands, it is necessary to make assumptions, like disable_depth
> > > > > > > > == 1 meaning that runtime PM is really enabled, but the PM core has
> > > > > > > > disabled it temporarily, which is somewhat questionable.
> > > > > > > >
> > > > > > > > Another problem with disabling is that it causes rpm_resume() to fail
> > > > > > > > even if the status is RPM_ACTIVE and it has to do that exactly because
> > > > > > > > it cannot know why runtime PM has been disabled. If it has never been
> > > > > > > > enabled, rpm_resume() must fail, but if it has been disabled
> > > > > > > > temporarily, rpm_resume() may return 1 when the status is RPM_ACTIVE.
> > > > > > > >
> > > > > > > > The new count allows the "enabled in general, but temporarily disabled
> > > > > > > > at the moment" to be handled cleanly.
> > > > > > >
> > > > > > > My overall comment is that I fail to understand why we need to
> > > > > > > distinguish between these two cases. To me, it shouldn't really
> > > > > > > matter, *why* runtime PM is (or have been) disabled for the device.
> > > > > >
> > > > > > It matters if you want to trust the status, because "disabled" means
> > > > > > "the status doesn't matter".
> > > > >
> > > > > Well, that doesn't really match how the runtime PM interface is being
> > > > > used today.
> > > >
> > > > Well, I clearly disagree.
> > >
> > > Alright, then we can agree to disagree. :-)
> > >
> > > >
> > > > > For example, we have a whole bunch of helper functions, allowing us to
> > > > > update and check the runtime PM state of the device, even when the
> > > > > disable_depth > 0. Some functions, like pm_runtime_set_active() for
> > > > > example, even take parents and device-links into account.
> > > >
> > > > That's true, but that's for a purpose.
> > > >
> > > > If runtime PM becomes enabled after using pm_runtime_set_active(), the
> > > > status should better be consistent with the settings of the parent
> > > > etc.
> > > >
> > > > > >
> > > > > > If you want the status to stay meaningful, but prevent callbacks from
> > > > > > running, you need something else.
> > > > > >
> > > > > > > The important point is that the default state for a device is
> > > > > > > RPM_SUSPENDED and someone has moved into RPM_ACTIVE, for whatever
> > > > > > > reason. That should be sufficient to allow rpm_resume() to return '1'
> > > > > > > when disable_depth > 0, shouldn't it?
> > > > > >
> > > > > > No, because there is no rule by which the status of devices with
> > > > > > PM-runtime disabled must be RPM_SUSPENDED.
> > > > >
> > > > > That's not what I was trying to say.
> > > > >
> > > > > The initial/default runtime PM state for a device is RPM_SUSPENDED,
> > > > > which is being set in pm_runtime_init(). Although, I agree that it
> > > > > can't be trusted that this state actually reflects the state of the
> > > > > HW, it's still a valid state for the device from a runtime PM point of
> > > > > view.
> > > >
> > > > No, it is not. It's just the default.
> > > >
> > > > > However, and more importantly, if the state has moved to RPM_ACTIVE,
> > > > > someone must have deliberately moved the device into that state.
> > > >
> > > > Sure, but it cannot be regarded as an indication on whether or not
> > > > runtime PM is supported and has ever been enabled for the given
> > > > device.
> > > >
> > > > Again, there is no rule regarding the status value for devices with
> > > > runtime PM disabled, either way.
> > >
> > > If I understand correctly, that means you think the
> > > pm_runtime_status_suspended() should really be converted to an
> > > internal runtime PM interface, not being exported to users outside.
> > > Right?
> >
> > Not really.
> >
> > I'm just saying that its usefulness is limited.
> >
> > My basic concern is that system-wide PM transitions must always invoke
> > callbacks for devices with PM-runtime disabled, because they may (or
> > may not) be functional regardless of the PM-runtime status and if they
> > are functional, they must be suspended. And note that supporting
> > system-wide PM is not optional and the only way to kind of disable it
> > is to return an error from a device suspend callback (but that's nasty
> > for some use cases).
> >
> > So the "Has PM-runtime been enabled?" question is really fundamental
> > for system-wide PM and it is not sufficient to look at the PM-runtime
> > status to find out, but if the PM-core itself disables PM-runtime
> > (which is has to do at one point to prevent PM-runtime from racing
> > with system-wide PM), it is hard to answer definitely in general.
> >
> > IMO the only way to make it possible to find that out in all cases is
> > to make the PM core retain the power.disable_depth value and that can
> > be done by making it use a different mechanism to prevent PM-runtime
> > callbacks from being run.
> >
> > Alternatively, the current PM-runtime status could be "latched" during
> > the PM-runtime disable operation if power.disable_depth is 0 (and that
> > "latched" value would be initialized to "invalid" in case PM-runtime
> > is never enabled).
>
> Which would be something like the patch below (which additionally cleans up
> pm_runtime_enable() while at it).
>
> The idea being that if the status was RPM_ACTIVE last time when
> power.disable_depth was changing from 0 to 1 and it is still RPM_ACTIVE, it
> can be assumed to reflect what happened to the device last time when it was
> using PM-runtime.

Alright, this sounds reasonable to me. I have also looked at the code
below and it looks good to me.

Do you intend to post a formal patch? In any case, feel free to add my
reviewed-by tag.

Kind regards
Uffe

>
> ---
> drivers/base/power/runtime.c | 38 ++++++++++++++++++++------------------
> include/linux/pm.h | 2 ++
> 2 files changed, 22 insertions(+), 18 deletions(-)
>
> Index: linux-pm/drivers/base/power/runtime.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/runtime.c
> +++ linux-pm/drivers/base/power/runtime.c
> @@ -744,11 +744,10 @@ static int rpm_resume(struct device *dev
> repeat:
> if (dev->power.runtime_error)
> retval = -EINVAL;
> - else if (dev->power.disable_depth == 1 && dev->power.is_suspended
> - && dev->power.runtime_status == RPM_ACTIVE)
> - retval = 1;
> else if (dev->power.disable_depth > 0)
> - retval = -EACCES;
> + retval = dev->power.runtime_status == RPM_ACTIVE &&
> + dev->power.last_status == RPM_ACTIVE ? 1 : -EACCES;
> +
> if (retval)
> goto out;
>
> @@ -1410,8 +1409,10 @@ void __pm_runtime_disable(struct device
> /* Update time accounting before disabling PM-runtime. */
> update_pm_runtime_accounting(dev);
>
> - if (!dev->power.disable_depth++)
> + if (!dev->power.disable_depth++) {
> __pm_runtime_barrier(dev);
> + dev->power.last_status = dev->power.runtime_status;
> + }
>
> out:
> spin_unlock_irq(&dev->power.lock);
> @@ -1428,23 +1429,23 @@ void pm_runtime_enable(struct device *de
>
> spin_lock_irqsave(&dev->power.lock, flags);
>
> - if (dev->power.disable_depth > 0) {
> - dev->power.disable_depth--;
> -
> - /* About to enable runtime pm, set accounting_timestamp to now */
> - if (!dev->power.disable_depth)
> - dev->power.accounting_timestamp = ktime_get_mono_fast_ns();
> - } else {
> + if (!dev->power.disable_depth) {
> dev_warn(dev, "Unbalanced %s!\n", __func__);
> + goto out;
> }
>
> - WARN(!dev->power.disable_depth &&
> - dev->power.runtime_status == RPM_SUSPENDED &&
> - !dev->power.ignore_children &&
> - atomic_read(&dev->power.child_count) > 0,
> - "Enabling runtime PM for inactive device (%s) with active children\n",
> - dev_name(dev));
> + if (--dev->power.disable_depth > 0)
> + goto out;
> +
> + dev->power.last_status = RPM_INVALID;
> + dev->power.accounting_timestamp = ktime_get_mono_fast_ns();
> +
> + if (dev->power.runtime_status == RPM_SUSPENDED &&
> + !dev->power.ignore_children &&
> + atomic_read(&dev->power.child_count) > 0)
> + dev_warn(dev, "Enabling runtime PM for inactive device with active children\n");
>
> +out:
> spin_unlock_irqrestore(&dev->power.lock, flags);
> }
> EXPORT_SYMBOL_GPL(pm_runtime_enable);
> @@ -1640,6 +1641,7 @@ EXPORT_SYMBOL_GPL(__pm_runtime_use_autos
> void pm_runtime_init(struct device *dev)
> {
> dev->power.runtime_status = RPM_SUSPENDED;
> + dev->power.last_status = RPM_INVALID;
> dev->power.idle_notification = false;
>
> dev->power.disable_depth = 1;
> Index: linux-pm/include/linux/pm.h
> ===================================================================
> --- linux-pm.orig/include/linux/pm.h
> +++ linux-pm/include/linux/pm.h
> @@ -499,6 +499,7 @@ const struct dev_pm_ops __maybe_unused n
> */
>
> enum rpm_status {
> + RPM_INVALID = -1,
> RPM_ACTIVE = 0,
> RPM_RESUMING,
> RPM_SUSPENDED,
> @@ -612,6 +613,7 @@ struct dev_pm_info {
> unsigned int links_count;
> enum rpm_request request;
> enum rpm_status runtime_status;
> + enum rpm_status last_status;
> int runtime_error;
> int autosuspend_delay;
> u64 last_busy;
>
>
>

\
 
 \ /
  Last update: 2021-12-02 12:30    [W:0.076 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site