lkml.org 
[lkml]   [2021]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] usb: musb: dsps: Use platform_get_irq_byname() to get the interrupt
Date
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/usb/musb/musb_dsps.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index b5935834f9d2..f75cde0f2b43 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -15,6 +15,7 @@
*/

#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -739,12 +740,14 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
}
resources[0] = *res;

- res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc");
- if (!res) {
- dev_err(dev, "failed to get irq.\n");
- return -EINVAL;
- }
- resources[1] = *res;
+ ret = platform_get_irq_byname(parent, "mc");
+ if (ret < 0)
+ return ret;
+
+ resources[1].start = ret;
+ resources[1].end = ret;
+ resources[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(ret);
+ resources[1].name = "mc";

/* allocate the child platform device */
musb = platform_device_alloc("musb-hdrc",
--
2.17.1
\
 
 \ /
  Last update: 2021-12-20 02:05    [W:0.085 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site