lkml.org 
[lkml]   [2021]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v5 net-next 12/13] pinctrl: ocelot: add MFD functionality through ocelot-core
Date
In the MFD case we need to requrest a regmap from the patern device instead
of using mmio. This allows for the driver to be used in either case.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
drivers/pinctrl/pinctrl-ocelot.c | 30 ++++++++++++++++++++++++------
1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 42aab9ba049a..d07ac7a0b487 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -10,6 +10,7 @@
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -20,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <soc/mscc/ocelot.h>

#include "core.h"
#include "pinconf.h"
@@ -1123,6 +1125,9 @@ static int lan966x_pinmux_set_mux(struct pinctrl_dev *pctldev,
return 0;
}

+#if defined(REG)
+#undef REG
+#endif
#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))

static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
@@ -1805,6 +1810,7 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct ocelot_pinctrl *info;
struct regmap *pincfg;
+ struct resource *res;
void __iomem *base;
int ret;
struct regmap_config regmap_config = {
@@ -1819,16 +1825,28 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)

info->desc = (struct pinctrl_desc *)device_get_match_data(dev);

- base = devm_ioremap_resource(dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
- if (IS_ERR(base))
- return PTR_ERR(base);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(res)) {
+ dev_err(dev, "Failed to get resource\n");
+ return PTR_ERR(res);
+ }

info->stride = 1 + (info->desc->npins - 1) / 32;

- regmap_config.max_register = OCELOT_GPIO_SD_MAP * info->stride + 15 * 4;
+ if (!device_is_mfd(pdev)) {
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap_config.max_register =
+ OCELOT_GPIO_SD_MAP * info->stride + 15 * 4;
+
+ info->map = devm_regmap_init_mmio(dev, base, &regmap_config);
+ } else {
+ info->map = ocelot_mfd_get_regmap_from_resource(dev->parent,
+ res);
+ }

- info->map = devm_regmap_init_mmio(dev, base, &regmap_config);
if (IS_ERR(info->map)) {
dev_err(dev, "Failed to create regmap\n");
return PTR_ERR(info->map);
--
2.25.1
\
 
 \ /
  Last update: 2021-12-18 22:51    [W:0.147 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site