lkml.org 
[lkml]   [2021]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup_flag
Date
The Soft Reset and Rescue Sequence Support is defined in BFPT_DWORD(16)
starting with JESD216A. The first version of SFDP, JESD216 (April 2011),
defines just the first 9 BFPT DWORDS, thus it does not contain information
about the Software Reset and Rescue Support. Since this support can not
be discovered by parsing the first SFDP version, introduce a flash_info
fixup_flag that will be used either by flashes that define
JESD216 (April 2011) or by flashes that do not define SFDP at all.
In case a flash defines BFPT_DWORD(16) but with wrong values, one should
instead use a post_bfpt() hook and set SNOR_F_SOFT_RESET.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
v4: no changes
v3: collect R-b
v2: no changes
drivers/mtd/spi-nor/core.c | 3 +++
drivers/mtd/spi-nor/core.h | 3 +++
2 files changed, 6 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 2e21d5ac0e2d..32d80fdaa2a2 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2699,6 +2699,9 @@ static void spi_nor_init_fixup_flags(struct spi_nor *nor)

if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
+ if (fixup_flags & SPI_NOR_SOFT_RESET)
+ nor->flags |= SNOR_F_SOFT_RESET;
}

/**
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 2afb610853a9..70c6bb7f5f04 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -373,6 +373,8 @@ struct spi_nor_fixups {
* memory size above 128Mib.
* SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
* via a volatile bit.
+ * SPI_NOR_SOFT_RESET: flash supports software reset enable, reset
+ * sequence.
* @mfr_flags: manufacturer private flags. Used in the manufacturer fixup
* hooks to differentiate support between flashes of the same
* manufacturer.
@@ -416,6 +418,7 @@ struct flash_info {
u8 fixup_flags;
#define SPI_NOR_4B_OPCODES BIT(0)
#define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1)
+#define SPI_NOR_SOFT_RESET BIT(2)

u8 mfr_flags;

--
2.25.1
\
 
 \ /
  Last update: 2021-12-17 18:35    [W:0.046 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site