lkml.org 
[lkml]   [2021]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
On Fri, Dec 17, 2021 at 5:04 PM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Fri, Dec 17, 2021 at 10:42 AM Lad, Prabhakar
> <prabhakar.csengg@gmail.com> wrote:
> >
> > Hi Rob,
> >
> > On Fri, Dec 17, 2021 at 2:50 PM Rob Herring <robh+dt@kernel.org> wrote:
> > >
> > > On Fri, Dec 17, 2021 at 8:17 AM Lad Prabhakar
> > > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > > >
> > > > Merge the OF pata_of_platform driver into pata_platform.
> > > >
> > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > ---
> > > > drivers/ata/Kconfig | 3 +-
> > > > drivers/ata/Makefile | 1 -
> > > > drivers/ata/pata_of_platform.c | 90 ---------------
> > > > drivers/ata/pata_platform.c | 199 +++++++++++++++++++++++++--------
> > > > include/linux/ata_platform.h | 9 --
> > > > 5 files changed, 153 insertions(+), 149 deletions(-)
> > > > delete mode 100644 drivers/ata/pata_of_platform.c
> > > >
> > > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> > > > index a7da8ea7b3ed..0fab5cae45d5 100644
> > > > --- a/drivers/ata/Kconfig
> > > > +++ b/drivers/ata/Kconfig
> > > > @@ -1122,7 +1122,8 @@ config PATA_PLATFORM
> > > >
> > > > config PATA_OF_PLATFORM
> > > > tristate "OpenFirmware platform device PATA support"
> > > > - depends on PATA_PLATFORM && OF
> > > > + depends on OF
> > > > + select PATA_PLATFORM
> > >
> > > Can't we just kill the kconfig option?
> > >
> > No, as there are a couple defconfigs which have this option enabled.
> > So the plan is once this patch is merged for the send in the patches
> > for defconfig files for next release and a release later we can safely
> > drop this. So that we don't break anything.
>
> Wouldn't they all be fine since they already have
> CONFIG_PATA_PLATFORM=y as well?
>
I didn't realize all those defconfigs already have
CONFIG_PATA_PLATFORM enabled. So in that case PATA_OF_PLATFORM can be
wiped out.

> Either way, that's fine.
>
> >
> > > > help
> > > > This option enables support for generic directly connected ATA
> > > > devices commonly found on embedded systems with OpenFirmware
> > >
> > >
> > > > diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
> > > > index cb3134bf88eb..b8d8d51bc562 100644
> > > > --- a/drivers/ata/pata_platform.c
> > > > +++ b/drivers/ata/pata_platform.c
> > > > @@ -11,21 +11,42 @@
> > > > * License. See the file "COPYING" in the main directory of this archive
> > > > * for more details.
> > > > */
> > > > -#include <linux/kernel.h>
> > > > -#include <linux/module.h>
> > > > -#include <linux/blkdev.h>
> > > > -#include <scsi/scsi_host.h>
> > > > #include <linux/ata.h>
> > > > +#include <linux/ata_platform.h>
> > > > +#include <linux/blkdev.h>
> > > > +#include <linux/kernel.h>
> > > > #include <linux/libata.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of_address.h>
> > > > #include <linux/platform_device.h>
> > > > -#include <linux/ata_platform.h>
> > > > +#include <scsi/scsi_host.h>
> > > >
> > > > #define DRV_NAME "pata_platform"
> > > > #define DRV_VERSION "1.2"
> > > >
> > > > static int pio_mask = 1;
> > > > module_param(pio_mask, int, 0);
> > > > -MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default");
> > > > +MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default (param valid only for non DT users)");
> > > > +
> > > > +/**
> > > > + * struct pata_platform_priv - Private info
> > > > + * @io_res: Resource representing I/O base
> > > > + * @ctl_res: Resource representing CTL base
> > > > + * @irq_res: Resource representing IRQ and its flags
> > > > + * @ioport_shift: I/O port shift
> > > > + * @mask: PIO mask
> > > > + * @sht: scsi_host_template to use when registering
> > > > + * @use16bit: Flag to indicate 16-bit IO instead of 32-bit
> > > > + */
> > > > +struct pata_platform_priv {
> > > > + struct resource *io_res;
> > > > + struct resource *ctl_res;
> > > > + struct resource *irq_res;
> > > > + unsigned int ioport_shift;
> > > > + int mask;
> > > > + struct scsi_host_template *sht;
> > > > + bool use16bit;
> > > > +};
> > > >
> > > > /*
> > > > * Provide our own set_mode() as we don't want to change anything that has
> > > > @@ -66,15 +87,9 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
> > > > }
> > > >
> > > > /**
> > > > - * __pata_platform_probe - attach a platform interface
> > > > + * pata_platform_host_activate - attach a platform interface
> > > > * @dev: device
> > > > - * @io_res: Resource representing I/O base
> > > > - * @ctl_res: Resource representing CTL base
> > > > - * @irq_res: Resource representing IRQ and its flags
> > > > - * @ioport_shift: I/O port shift
> > > > - * @__pio_mask: PIO mask
> > > > - * @sht: scsi_host_template to use when registering
> > > > - * @use16bit: Flag to indicate 16-bit IO instead of 32-bit
> > > > + * @priv: Pointer to struct pata_platform_priv
> > > > *
> > > > * Register a platform bus IDE interface. Such interfaces are PIO and we
> > > > * assume do not support IRQ sharing.
> > > > @@ -94,10 +109,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
> > > > *
> > > > * If no IRQ resource is present, PIO polling mode is used instead.
> > > > */
> > > > -int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > > > - struct resource *ctl_res, struct resource *irq_res,
> > > > - unsigned int ioport_shift, int __pio_mask,
> > > > - struct scsi_host_template *sht, bool use16bit)
> > > > +static int pata_platform_host_activate(struct device *dev, struct pata_platform_priv *priv)
> > > > {
> > > > struct ata_host *host;
> > > > struct ata_port *ap;
> > > > @@ -108,15 +120,15 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > > > /*
> > > > * Check for MMIO
> > > > */
> > > > - mmio = (( io_res->flags == IORESOURCE_MEM) &&
> > > > - (ctl_res->flags == IORESOURCE_MEM));
> > > > + mmio = ((priv->io_res->flags == IORESOURCE_MEM) &&
> > > > + (priv->ctl_res->flags == IORESOURCE_MEM));
> > > >
> > > > /*
> > > > * And the IRQ
> > > > */
> > > > - if (irq_res && irq_res->start > 0) {
> > > > - irq = irq_res->start;
> > > > - irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
> > > > + if (priv->irq_res && priv->irq_res->start > 0) {
> > > > + irq = priv->irq_res->start;
> > > > + irq_flags = (priv->irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
> > > > }
> > > >
> > > > /*
> > > > @@ -131,12 +143,12 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > > > ap->ops->inherits = &ata_sff_port_ops;
> > > > ap->ops->cable_detect = ata_cable_unknown;
> > > > ap->ops->set_mode = pata_platform_set_mode;
> > > > - if (use16bit)
> > > > + if (priv->use16bit)
> > > > ap->ops->sff_data_xfer = ata_sff_data_xfer;
> > > > else
> > > > ap->ops->sff_data_xfer = ata_sff_data_xfer32;
> > > >
> > > > - ap->pio_mask = __pio_mask;
> > > > + ap->pio_mask = priv->mask;
> > > > ap->flags |= ATA_FLAG_SLAVE_POSS;
> > > >
> > > > /*
> > > > @@ -151,15 +163,15 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > > > * Handle the MMIO case
> > > > */
> > > > if (mmio) {
> > > > - ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
> > > > - resource_size(io_res));
> > > > - ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
> > > > - resource_size(ctl_res));
> > > > + ap->ioaddr.cmd_addr = devm_ioremap(dev, priv->io_res->start,
> > > > + resource_size(priv->io_res));
> > > > + ap->ioaddr.ctl_addr = devm_ioremap(dev, priv->ctl_res->start,
> > > > + resource_size(priv->ctl_res));
> > > > } else {
> > > > - ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
> > > > - resource_size(io_res));
> > > > - ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
> > > > - resource_size(ctl_res));
> > > > + ap->ioaddr.cmd_addr = devm_ioport_map(dev, priv->io_res->start,
> > > > + resource_size(priv->io_res));
> > > > + ap->ioaddr.ctl_addr = devm_ioport_map(dev, priv->ctl_res->start,
> > > > + resource_size(priv->ctl_res));
> > > > }
> > > > if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
> > > > dev_err(dev, "failed to map IO/CTL base\n");
> > > > @@ -168,23 +180,83 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > > >
> > > > ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
> > > >
> > > > - pata_platform_setup_port(&ap->ioaddr, ioport_shift);
> > > > + pata_platform_setup_port(&ap->ioaddr, priv->ioport_shift);
> > > >
> > > > ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
> > > > - (unsigned long long)io_res->start,
> > > > - (unsigned long long)ctl_res->start);
> > > > + (unsigned long long)priv->io_res->start,
> > > > + (unsigned long long)priv->ctl_res->start);
> > > >
> > > > /* activate */
> > > > return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
> > > > - irq_flags, sht);
> > > > + irq_flags, priv->sht);
> > > > }
> > > > -EXPORT_SYMBOL_GPL(__pata_platform_probe);
> > > >
> > > > -static int pata_platform_probe(struct platform_device *pdev)
> > > > +static int pata_of_platform_get_pdata(struct platform_device *ofdev,
> > > > + struct pata_platform_priv *priv)
> > > > {
> > > > - struct resource *io_res;
> > > > + struct device_node *dn = ofdev->dev.of_node;
> > > > struct resource *ctl_res;
> > > > struct resource *irq_res;
> > > > + struct resource *io_res;
> > > > + int pio_mode = 0;
> > > > + int irq;
> > > > + int ret;
> > > > +
> > > > + ctl_res = devm_kzalloc(&ofdev->dev, sizeof(*ctl_res), GFP_KERNEL);
> > > > + io_res = devm_kzalloc(&ofdev->dev, sizeof(*io_res), GFP_KERNEL);
> > > > + irq_res = devm_kzalloc(&ofdev->dev, sizeof(*irq_res), GFP_KERNEL);
> > > > + if (!ctl_res || !io_res || !irq_res)
> > > > + return -ENOMEM;
> > > > +
> > > > + ret = of_address_to_resource(dn, 0, io_res);
> > > > + if (ret) {
> > > > + dev_err(&ofdev->dev, "can't get IO address from device tree\n");
> > > > + return -EINVAL;
> > > > + }
> > > > + priv->io_res = io_res;
> > > > +
> > > > + ret = of_address_to_resource(dn, 1, ctl_res);
> > > > + if (ret) {
> > > > + dev_err(&ofdev->dev, "can't get CTL address from device tree\n");
> > > > + return -EINVAL;
> > > > + }
> > > > + priv->ctl_res = ctl_res;
> > > > +
> > > > + irq = platform_get_irq_optional(ofdev, 0);
> > > > + if (irq <= 0 && irq != -ENXIO)
> > > > + return irq ? irq : -ENXIO;
> > > > +
> > > > + if (irq > 0) {
> > > > + irq_res->start = irq;
> > > > + irq_res->end = irq;
> > > > + irq_res->flags = IORESOURCE_IRQ | irq_get_trigger_type(irq);
> > >
> > > Though of_irq_to_resource() does the same thing, I think the irq code
> > > handles the flags automatically for DT.
> > >
> > sorry you mean to drop the flags?
>
> Right.
>
Ok, I will drop it.

Cheers,
Prabhakar

\
 
 \ /
  Last update: 2021-12-17 18:15    [W:0.051 / U:21.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site