lkml.org 
[lkml]   [2021]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] dt-bindings: regulator: tps62360: Convert to json-schema
Date
From: Thierry Reding <treding@nvidia.com>

Convert the Texas Instruments TPS62360 bindings from the free-form text
format to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../bindings/regulator/ti,tps62360.yaml | 80 +++++++++++++++++++
.../bindings/regulator/tps62360-regulator.txt | 44 ----------
2 files changed, 80 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/tps62360-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
new file mode 100644
index 000000000000..82558118284d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS62360 voltage regulator
+
+maintainers:
+ - Mark Brown <broonie@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - ti,tps62360
+ - ti,tps62361
+ - ti,tps62362
+ - ti,tps62363
+
+ reg:
+ maxItems: 1
+
+ ti,enable-vout-discharge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Enable output discharge.
+
+ ti,enable-pull-down:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Enable pull down.
+
+ ti,vsel0-gpio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: GPIO for controlling VSEL0 line. If this property is missing, then assume that
+ there is no GPIO for VSEL0 control.
+
+ ti,vsel1-gpio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: GPIO for controlling VSEL1 line. If this property is missing, then assume that
+ there is no GPIO for VSEL1 control.
+
+ ti,vsel0-state-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Initial state of VSEL0 input is high. If this property is missing, then assume
+ the state as low (0).
+
+ ti,vsel1-state-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Initial state of VSEL1 input is high. If this property is missing, then assume
+ the state as low (0).
+
+allOf:
+ - $ref: regulator.yaml
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@60 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ ti,vsel0-gpio = <&gpio1 16 0>;
+ ti,vsel1-gpio = <&gpio1 17 0>;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ ti,enable-pull-down;
+ ti,enable-vout-discharge;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
deleted file mode 100644
index 1b20c3dbcdb8..000000000000
--- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-TPS62360 Voltage regulators
-
-Required properties:
-- compatible: Must be one of the following.
- "ti,tps62360"
- "ti,tps62361",
- "ti,tps62362",
- "ti,tps62363",
-- reg: I2C slave address
-
-Optional properties:
-- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
-- ti,enable-pull-down: Enable pull down. This is boolean value.
-- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
- If this property is missing, then assume that there is no GPIO
- for vsel0 control.
-- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
- If this property is missing, then assume that there is no GPIO
- for vsel1 control.
-- ti,vsel0-state-high: Initial state of vsel0 input is high.
- If this property is missing, then assume the state as low (0).
-- ti,vsel1-state-high: Initial state of vsel1 input is high.
- If this property is missing, then assume the state as low (0).
-
-Any property defined as part of the core regulator binding, defined in
-regulator.txt, can also be used.
-
-Example:
-
- abc: tps62360 {
- compatible = "ti,tps62361";
- reg = <0x60>;
- regulator-name = "tps62361-vout";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on
- ti,vsel0-gpio = <&gpio1 16 0>;
- ti,vsel1-gpio = <&gpio1 17 0>;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- ti,enable-pull-down;
- ti,enable-force-pwm;
- ti,enable-vout-discharge;
- };
--
2.34.1
\
 
 \ /
  Last update: 2021-12-17 18:06    [W:0.106 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site