lkml.org 
[lkml]   [2021]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] dt-bindings: regulator: pwm: Convert to json-schema
Date
From: Thierry Reding <treding@nvidia.com>

Convert the generic PWM regulator bindings from the free-form text
format to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../bindings/regulator/pwm-regulator.txt | 92 -------------
.../bindings/regulator/pwm-regulator.yaml | 121 ++++++++++++++++++
2 files changed, 121 insertions(+), 92 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
deleted file mode 100644
index 3d78d507e29f..000000000000
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Bindings for the Generic PWM Regulator
-======================================
-
-Currently supports 2 modes of operation:
-
-Voltage Table: When in this mode, a voltage table (See below) of
- predefined voltage <=> duty-cycle values must be
- provided via DT. Limitations are that the regulator can
- only operate at the voltages supplied in the table.
- Intermediary duty-cycle values which would normally
- allow finer grained voltage selection are ignored and
- rendered useless. Although more control is given to
- the user if the assumptions made in continuous-voltage
- mode do not reign true.
-
-Continuous Voltage: This mode uses the regulator's maximum and minimum
- supplied voltages specified in the
- regulator-{min,max}-microvolt properties to calculate
- appropriate duty-cycle values. This allows for a much
- more fine grained solution when compared with
- voltage-table mode above. This solution does make an
- assumption that a %50 duty-cycle value will cause the
- regulator voltage to run at half way between the
- supplied max_uV and min_uV values.
-
-Required properties:
---------------------
-- compatible: Should be "pwm-regulator"
-
-- pwms: PWM specification (See: ../pwm/pwm.txt)
-
-Only required for Voltage Table Mode:
-- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells
- First cell is voltage in microvolts (uV)
- Second cell is duty-cycle in percent (%)
-
-Optional properties for Continuous mode:
-- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not
- defined, <100> is assumed, meaning that
- pwm-dutycycle-range contains values expressed in
- percent.
-
-- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding
- the dutycycle for regulator-min-microvolt and the
- second one the dutycycle for regulator-max-microvolt.
- Duty cycle values are expressed in pwm-dutycycle-unit.
- If not defined, <0 100> is assumed.
-
-NB: To be clear, if voltage-table is provided, then the device will be used
-in Voltage Table Mode. If no voltage-table is provided, then the device will
-be used in Continuous Voltage Mode.
-
-Optional properties:
---------------------
-- enable-gpios: GPIO to use to enable/disable the regulator
-
-Any property defined as part of the core regulator binding can also be used.
-(See: ../regulator/regulator.txt)
-
-Continuous Voltage With Enable GPIO Example:
- pwm_regulator {
- compatible = "pwm-regulator";
- pwms = <&pwm1 0 8448 0>;
- enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- regulator-min-microvolt = <1016000>;
- regulator-max-microvolt = <1114000>;
- regulator-name = "vdd_logic";
- /* unit == per-mille */
- pwm-dutycycle-unit = <1000>;
- /*
- * Inverted PWM logic, and the duty cycle range is limited
- * to 30%-70%.
- */
- pwm-dutycycle-range = <700 300>; /* */
- };
-
-Voltage Table Example:
- pwm_regulator {
- compatible = "pwm-regulator";
- pwms = <&pwm1 0 8448 0>;
- regulator-min-microvolt = <1016000>;
- regulator-max-microvolt = <1114000>;
- regulator-name = "vdd_logic";
-
- /* Voltage Duty-Cycle */
- voltage-table = <1114000 0>,
- <1095000 10>,
- <1076000 20>,
- <1056000 30>,
- <1036000 40>,
- <1016000 50>;
- };
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
new file mode 100644
index 000000000000..d87e8110989d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PWM Regulator
+
+maintainers:
+ - Rob Herring <robh+dt@kernel.org>
+ - Mark Brown <broonie@kernel.org>
+
+description: |
+ Currently supports 2 modes of operation:
+
+ - Voltage Table: When in this mode, a voltage table (See below) of predefined voltage <=>
+ duty-cycle values must be provided via DT. Limitations are that the regulator can only
+ operate at the voltages supplied in the table. Intermediary duty-cycle values which would
+ normally allow finer grained voltage selection are ignored and rendered useless. Although
+ more control is given to the user if the assumptions made in continuous-voltage mode do not
+ reign true.
+
+ - Continuous Voltage: This mode uses the regulator's maximum and minimum supplied voltages
+ specified in the regulator-{min,max}-microvolt properties to calculate appropriate duty-cycle
+ values. This allows for a much more fine grained solution when compared with voltage-table
+ mode above. This solution does make an assumption that a %50 duty-cycle value will cause the
+ regulator voltage to run at half way between the supplied max_uV and min_uV values.
+
+ NB: To be clear, if voltage-table is provided, then the device will be used
+ in Voltage Table Mode. If no voltage-table is provided, then the device will
+ be used in Continuous Voltage Mode.
+
+ Any property defined as part of the core regulator binding can also be used. (See:
+ ../regulator/regulator.txt)
+
+properties:
+ compatible:
+ const: pwm-regulator
+
+ pwms:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description: phandle and PWM specifier (see ../pwm/pwm.txt)
+
+ # Only required for Voltage Table Mode:
+ voltage-table:
+ description: Voltage and Duty-Cycle table consisting of 2 cells. The first cell is the voltage
+ in microvolts (uV) and the second cell is duty-cycle in percent (%).
+ $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+
+ # Optional properties for Continuous mode:
+ pwm-dutycycle-unit:
+ description: Integer value encoding the duty cycle unit. If not defined, <100> is assumed,
+ meaning that pwm-dutycycle-range contains values expressed in percent.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ pwm-dutycycle-range:
+ description: Should contain 2 entries. The first entry is encoding the dutycycle for
+ regulator-min-microvolt and the second one the dutycycle for regulator-max-microvolt. Duty
+ cycle values are expressed in pwm-dutycycle-unit. If not defined, <0 100> is assumed.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+ # Optional properties:
+ enable-gpios:
+ description: GPIO to use to enable/disable the regulator
+
+ # from regulator.yaml
+ regulator-enable-ramp-delay: true
+ regulator-max-microvolt: true
+ regulator-min-microvolt: true
+ regulator-name: true
+ regulator-ramp-delay: true
+ regulator-settling-time-us: true
+ vin-supply: true
+
+allOf:
+ - $ref: "regulator.yaml"
+
+additionalProperties: false
+
+required:
+ - compatible
+ - pwms
+
+examples:
+ # Continuous Voltage With Enable GPIO:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ pwm_regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 8448 0>;
+ enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+ /* unit == per-mille */
+ pwm-dutycycle-unit = <1000>;
+ /*
+ * Inverted PWM logic, and the duty cycle range is limited
+ * to 30%-70%.
+ */
+ pwm-dutycycle-range = <700 300>; /* */
+ };
+
+ # Voltage Table:
+ - |
+ regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 8448 0>;
+ regulator-min-microvolt = <1016000>;
+ regulator-max-microvolt = <1114000>;
+ regulator-name = "vdd_logic";
+
+ /* Voltage Duty-Cycle */
+ voltage-table = <1114000 0>,
+ <1095000 10>,
+ <1076000 20>,
+ <1056000 30>,
+ <1036000 40>,
+ <1016000 50>;
+ };
--
2.34.1
\
 
 \ /
  Last update: 2021-12-17 18:06    [W:0.178 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site