lkml.org 
[lkml]   [2021]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/2] kbuild: use perl instead of shell to get file size
On Wed, Nov 24, 2021 at 4:30 PM Alex Xu (Hello71) <alex_y_xu@yahoo.ca> wrote:
>
> This makes it easier to get the size of multiple files. Perl is already
> a requirement for all builds to do header checks, so this is not an
> additional dependency.

$ egrep -B1 -A4 'file-size.pl' build-log_5.15.9-1-amd64-clang13-lto.txt
49219-+ clang -nostdinc -I./arch/x86/include
-I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi
-I./arch/x86/include/generated/uapi -I./include/uapi
-I./include/generated/uapi -include ./include/linux/compiler-version.h
-include ./include/linux/kconfig.h -D__KERNEL__ -Qunused-arguments
-fmacro-prefix-map=./= -D__AS
SEMBLY__ -fno-PIE --target=x86_64-linux-gnu -fintegrated-as
-Werror=unknown-warning-option -Werror=ignored-optimization-argument
-m64 -DCC_USING_NOP_MCOUNT -DCC_USING_
FENTRY -fno-lto -c -o .tmp_vmlinux.kallsyms2.o .tmp_vmlinux.kallsyms2.S
49220:+ perl ./scripts/file-size.pl .tmp_vmlinux.kallsyms1.o
49221-+ size1=1932072
49222:+ perl ./scripts/file-size.pl .tmp_vmlinux.kallsyms2.o
49223-+ size2=1932072
49224-+ [ 1932072 -ne 1932072 ]
49225-+ [ -n ]
49226-+ vmlinux_link vmlinux .tmp_vmlinux.kallsyms2.o .btf.vmlinux.bin.o

Tested-by: Sedat Dilek <sedat.dilek@gmail.com>

- Sedat -

> ---
> arch/arm/boot/deflate_xip_data.sh | 2 +-
> arch/powerpc/boot/wrapper | 2 +-
> scripts/Makefile.lib | 9 ++-------
> scripts/file-size.pl | 8 ++++++++
> scripts/file-size.sh | 4 ----
> scripts/link-vmlinux.sh | 4 ++--
> 6 files changed, 14 insertions(+), 15 deletions(-)
> create mode 100755 scripts/file-size.pl
> delete mode 100755 scripts/file-size.sh
>
> diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
> index 304495c3c2c5..14cfa2babb93 100755
> --- a/arch/arm/boot/deflate_xip_data.sh
> +++ b/arch/arm/boot/deflate_xip_data.sh
> @@ -43,7 +43,7 @@ data_start=$(($__data_loc - $base_offset))
> data_end=$(($_edata_loc - $base_offset))
>
> # Make sure data occupies the last part of the file.
> -file_end=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$XIPIMAGE")
> +file_end=$(${PERL} "${srctree}/scripts/file-size.pl" "$XIPIMAGE")
> if [ "$file_end" != "$data_end" ]; then
> printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
> $(($file_end + $base_offset)) $_edata_loc 1>&2
> diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> index 9184eda780fd..9f9ee8613432 100755
> --- a/arch/powerpc/boot/wrapper
> +++ b/arch/powerpc/boot/wrapper
> @@ -380,7 +380,7 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext"
>
> # Calculate the vmlinux.strip size
> ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
> -strip_size=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$vmz.$$")
> +strip_size=$(${PERL} "${srctree}/scripts/file-size.pl" "$vmz.$$")
>
> if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then
> # recompress the image if we need to
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index d1f865b8c0cb..ca901814986a 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -379,13 +379,8 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
>
> # Bzip2 and LZMA do not include size in file... so we have to fake that;
> # append the size as a 32-bit littleendian number as gzip does.
> -size_append = printf $(shell \
> -dec_size=0; \
> -for F in $(real-prereqs); do \
> - fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
> - dec_size=$$(expr $$dec_size + $$fsize); \
> -done; \
> -printf "%08x\n" $$dec_size | \
> +total_size = $(shell $(PERL) $(srctree)/scripts/file-size.pl $(real-prereqs))
> +size_append = printf $(shell printf "%08x\n" $(total_size) | \
> sed 's/\(..\)/\1 /g' | { \
> read ch0 ch1 ch2 ch3; \
> for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
> diff --git a/scripts/file-size.pl b/scripts/file-size.pl
> new file mode 100755
> index 000000000000..170bb6d048fa
> --- /dev/null
> +++ b/scripts/file-size.pl
> @@ -0,0 +1,8 @@
> +#!/usr/bin/perl -w
> +# SPDX-License-Identifier: GPL-2.0
> +my $total = 0;
> +foreach (@ARGV) {
> + @stat = stat $_ or die "$_: $!";
> + $total += $stat[7];
> +}
> +print "$total\n";
> diff --git a/scripts/file-size.sh b/scripts/file-size.sh
> deleted file mode 100755
> index 7eb7423416b5..000000000000
> --- a/scripts/file-size.sh
> +++ /dev/null
> @@ -1,4 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -set -- $(ls -dn "$1")
> -printf '%s\n' "$5"
> diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
> index 5cdd9bc5c385..c3fa38bd18ab 100755
> --- a/scripts/link-vmlinux.sh
> +++ b/scripts/link-vmlinux.sh
> @@ -384,8 +384,8 @@ if [ -n "${CONFIG_KALLSYMS}" ]; then
> kallsyms_step 2
>
> # step 3
> - size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso_prev})
> - size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
> + size1=$(${PERL} "${srctree}/scripts/file-size.pl" ${kallsymso_prev})
> + size2=$(${PERL} "${srctree}/scripts/file-size.pl" ${kallsymso})
>
> if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
> kallsyms_step 3
> --
> 2.34.0
>

\
 
 \ /
  Last update: 2021-12-17 14:46    [W:0.373 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site