lkml.org 
[lkml]   [2021]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Add ADXL367 driver
Date
The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.

The ADXL367 does not alias input signals to achieve ultralow power
consumption, it samples the full bandwidth of the sensor at all
data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
with a resolution of 0.25mg/LSB on the +-2 g range.

In addition to its ultralow power consumption, the ADXL367
has many features to enable true system level power reduction.
It includes a deep multimode output FIFO, a built-in micropower
temperature sensor, and an internal ADC for synchronous conversion
of an additional analog input.

V1 -> V2
* add support for vdd and vddio supplies
* lock fifo_watermark retrieval
* fix indentation of sysfs_emit for fifo_mode
* dt-bindings: add spi-max-frequency: true
* dt-bindings: remove cs-gpios property
* dt-bindings: remove status property
* dt-bindings: add support for vdd

V2 -> V3
* MAINTAINERS: use wildcard for adxl367
* dt-bindings: adxl367@addr -> accelerometer@addr
* put asm include after linux includes
* drop registers accessed implicitly
* fifo_full -> fifo_watermark
* print expected device id
* remove INDIO_BUFFER_HARDWARE
* inline ADXL367_EVENT macro
* inline ADXL367_14BIT_SCAN_INFO
* inline regulator enum
* remove of.h in spi driver
* cast const void * to const u8 * in spi read
* switch to trigger-less buffer
* increase reset time as advised by hardware team
* let iio framework validate available channel masks
* enable adc or temp channel automatically on single read
* wait for 100ms after enabling adc or temp for output
to settle on single read (waiting on hardware team input)
* enable adc or temp channel automatically on buffered read
* claim direct mode when setting range
* claim direct mode when setting odr
* claim direct mode when setting event config
* sort status masks in descending bit order
* hardcode indio_dev name
* add some comments regarding spi message layout
* use bulk_write for activity and inactivity threshold
* use bulk_write for inactivity time
* use bool as return type of fifo format finding function
* remove shift from channels scan type

Cosmin Tanislav (2):
dt-bindings: iio: accel: add ADXL367
iio: accel: add ADXL367 driver

.../bindings/iio/accel/adi,adxl367.yaml | 79 +
MAINTAINERS | 8 +
drivers/iio/accel/Kconfig | 27 +
drivers/iio/accel/Makefile | 3 +
drivers/iio/accel/adxl367.c | 1617 +++++++++++++++++
drivers/iio/accel/adxl367.h | 23 +
drivers/iio/accel/adxl367_i2c.c | 89 +
drivers/iio/accel/adxl367_spi.c | 163 ++
8 files changed, 2009 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
create mode 100644 drivers/iio/accel/adxl367.c
create mode 100644 drivers/iio/accel/adxl367.h
create mode 100644 drivers/iio/accel/adxl367_i2c.c
create mode 100644 drivers/iio/accel/adxl367_spi.c

--
2.34.1

\
 
 \ /
  Last update: 2021-12-17 12:46    [W:0.128 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site