lkml.org 
[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 0/8] MIPS: JZ4780 and CI20 HDMI
Hi,

Patches 1 and 2 added to drm-misc-next.

I'll pick the rest when the regulator situation is sorted out.

Cheers,
-Paul


Le jeu., déc. 2 2021 at 19:39:45 +0100, H. Nikolaus Schaller
<hns@goldelico.com> a écrit :
> PATCH V11 2021-12-02 19:39:52:
> - patch 4/8: change devm_regulator_get_optional to devm_regulator_get
> and
> remove NULL check (requested by broonie@kernel.org)
> - patch 3/8: make hdmi-5v-supply required (requested by
> broonie@kernel.org)
>
> PATCH V10 2021-11-30 22:26:41:
> - patch 3/8: fix $id and $ref paths (found by robh@kernel.org)
>
> PATCH V9 2021-11-24 22:29:14:
> - patch 6/8: remove optional <0> for assigned-clocks and
> unintentionally included "unwedge" setup (found by
> paul@crapouillou.net)
> - patch 4/8: some cosmetics
> make regulator enable/disable only if not NULL (found by
> paul@crapouillou.net)
> simplify/fix error handling and driver cleanup on remove
> (proposed by paul@crapouillou.net)
> - patch 3/8: fix #include path in example (found by
> paul@crapouillou.net)
> fix missing "i" in unevaluatedProperties (found by
> robh@kernel.org)
> fix 4 spaces indentation for required: property (found
> by robh@kernel.org)
>
> PATCH V8 2021-11-23 19:14:00:
> - fix a bad editing result from patch 2/8 (found by
> paul@crapouillou.net)
>
> PATCH V7 2021-11-23 18:46:23:
> - changed gpio polarity of hdmi_power to 0 (suggested by
> paul@crapouillou.net)
> - fixed LCD1 irq number (bug found by paul@crapouillou.net)
> - removed "- 4" for calculating max_register (suggested by
> paul@crapouillou.net)
> - use unevaluatedPropertes instead of additionalProperties (suggested
> by robh@kernel.org)
> - moved and renamed ingenic,jz4780-hdmi.yaml (suggested by
> robh@kernel.org)
> - adjusted assigned-clocks changes to upstream which added some for
> SSI (by hns@goldelico.com)
> - rebased and tested with v5.16-rc2 + patch set drm/ingenic by
> paul@crapouillou.net (by hns@goldelico.com)
>
> PATCH V6 2021-11-10 20:43:33:
> - changed CONFIG_DRM_INGENIC_DW_HDMI to "m" (by hns@goldelico.com)
> - made ingenic-dw-hdmi an independent platform driver which can be
> compiled as module
> and removed error patch fixes for IPU (suggested by
> paul@crapouillou.net)
> - moved assigned-clocks from jz4780.dtsi to ci20.dts (suggested by
> paul@crapouillou.net)
> - fixed reg property in jz4780.dtsi to cover all registers incl.
> gamma and vee (by hns@goldelico.com)
> - added a base patch to calculate regmap size from DTS reg property
> (requested by paul@crapouillou.net)
> - restored resetting all bits except one in LCDOSDC (requested by
> paul@crapouillou.net)
> - clarified setting of cpos (suggested by paul@crapouillou.net)
> - moved bindings definition for ddc-i2c-bus (suggested by
> paul@crapouillou.net)
> - simplified mask definitions for JZ_LCD_DESSIZE (requested by
> paul@crapouillou.net)
> - removed setting alpha premultiplication (suggested by
> paul@crapouillou.net)
> - removed some comments (suggested by paul@crapouillou.net)
>
> PATCH V5 2021-10-05 14:28:44:
> - dropped mode_fixup and timings support in dw-hdmi as it is no
> longer needed in this V5 (by hns@goldelico.com)
> - dropped "drm/ingenic: add some jz4780 specific features"
> (stimulated by paul@crapouillou.net)
> - fixed typo in commit subject: "synopsis" -> "synopsys" (by
> hns@goldelico.com)
> - swapped clocks in jz4780.dtsi to match synopsys,dw-hdmi.yaml (by
> hns@goldelico.com)
> - improved, simplified, fixed, dtbschecked ingenic-jz4780-hdmi.yaml
> and made dependent of bridge/synopsys,dw-hdmi.yaml (based on
> suggestions by maxime@cerno.tech)
> - fixed binding vs. driver&DTS use of hdmi-5v regulator (suggested by
> maxime@cerno.tech)
> - dropped "drm/bridge: synopsis: Fix to properly handle HPD" - was a
> no longer needed workaround for a previous version
> (suggested by maxime@cerno.tech)
>
> PATCH V4 2021-09-27 18:44:38:
> - fix setting output_port = 1 (issue found by paul@crapouillou.net)
> - ci20.dts: convert to use hdmi-connector (by hns@goldelico.com)
> - add a hdmi-regulator to control +5V power (by hns@goldelico.com)
> - added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on
> plugin event detection (by hns@goldelico.com)
> - always allocate extended descriptor but initialize only for jz4780
> (by hns@goldelico.com)
> - updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various
> improvements v3" (by paul@crapouillou.net)
> - rebased to v5.13-rc3
>
> PATCH V3 2021-08-08 07:10:50:
> This series adds HDMI support for JZ4780 and CI20 board (and fixes
> one IPU related issue in registration error path)
> - [patch 1/8] switched from mode_fixup to atomic_check (suggested by
> robert.foss@linaro.org)
> - the call to the dw-hdmi specialization is still called mode_fixup
> - [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by
> paul@crapouillou.net)
> - factor out some non-HDMI features of the jz4780 into a separate
> patch
> - multiple fixes around max height
> - do not change regmap config but a copy on stack
> - define some constants
> - factor out fixing of drm_init error path for IPU into separate
> patch
> - use FIELD_PREP()
> - [patch 8/8] conversion to component framework dropped (suggested by
> Laurent.pinchart@ideasonboard.com and paul@crapouillou.net)
>
> PATCH V2 2021-08-05 16:08:05:
> - code and commit messages revisited for checkpatch warnings
> - rebased on v5.14-rc4
> - include (failed, hence RFC 8/8) attempt to convert to component
> framework
> (was suggested by Paul Cercueil <paul@crapouillou.net> a while ago)
>
> This series adds HDMI support for JZ4780 and CI20 board
>
>
>
> H. Nikolaus Schaller (3):
> drm/ingenic: prepare ingenic drm for later addition of JZ4780
> MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780
> [RFC] MIPS: DTS: Ingenic: adjust register size to available
> registers
>
> Paul Boddie (4):
> drm/ingenic: Add support for JZ4780 and HDMI output
> drm/ingenic: Add dw-hdmi driver for jz4780
> MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD
> controllers
> MIPS: DTS: CI20: Add DT nodes for HDMI setup
>
> Sam Ravnborg (1):
> dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema
>
> .../display/bridge/ingenic,jz4780-hdmi.yaml | 78 ++++++++++
> .../display/bridge/synopsys,dw-hdmi.yaml | 3 +
> arch/mips/boot/dts/ingenic/ci20.dts | 72 +++++++++-
> arch/mips/boot/dts/ingenic/jz4725b.dtsi | 2 +-
> arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
> arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++++++
> arch/mips/configs/ci20_defconfig | 6 +
> drivers/gpu/drm/ingenic/Kconfig | 9 ++
> drivers/gpu/drm/ingenic/Makefile | 1 +
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 62 +++++++-
> drivers/gpu/drm/ingenic/ingenic-drm.h | 38 +++++
> drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 136
> ++++++++++++++++++
> 13 files changed, 443 insertions(+), 8 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
> create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
>
> --
> 2.33.0
>


\
 
 \ /
  Last update: 2021-12-16 16:25    [W:0.146 / U:1.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site