lkml.org 
[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
Date
The number of interrupts lacks an upper bound, thus assuming one,
causing properly grouped "interrupts-extended" properties to be flagged
as an error by "make dtbs_check".

Fix this by adding the missing "maxItems". As the architectural maximum
is 15872 interrupts, using that as the limit would be unpractical.
Hence limit it to 9 interrupts (one interrupt for a system management
core, and two interrupts per core for other cores). This should be
sufficient for now, and the limit can always be increased when the need
arises.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
v2:
- Split in two patches,
- Improve patch description and document limit rationale.
---
.../bindings/interrupt-controller/sifive,plic-1.0.0.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 28b6b17fe4b26778..0c6687511457413e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -62,6 +62,7 @@ properties:

interrupts-extended:
minItems: 1
+ maxItems: 9
description:
Specifies which contexts are connected to the PLIC, with "-1" specifying
that a context is not present. Each node pointed to should be a
--
2.25.1
\
 
 \ /
  Last update: 2021-12-16 14:42    [W:1.366 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site