lkml.org 
[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] mmc: mmci: add hs200 support for stm32 sdmmc
From
Date
On 12/16/21 10:14 AM, Marek Vasut wrote:
> On 12/15/21 15:17, Yann Gautier wrote:
>> Use feedback clock for HS200 mode, as for SDR104.
>> The HS200 mode can be enabled through DT by using mmc-hs200-1_8v.
>> It is possible to use it on STM32MP13, but not STM32MP15 platforms.
>
> HS200 is possible even on the MP15, it just doesn't yield any
> (performance) benefits due to the slower bus clock (125 MHz or so?), so
> it isn't worth enabling it on MP15. It is nice to see MP13 can do better.

Hi Marek,

There is a limitation on MP15, please see errata sheet [1], chapter 2.3.19.
HS200 (and SDR104) shouldn't be enabled on MP15.

Best regards,
Yann

[1] https://www.st.com/resource/en/errata_sheet/dm00516256.pdf

\
 
 \ /
  Last update: 2021-12-16 10:45    [W:0.094 / U:1.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site