lkml.org 
[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] media: imx: imx8mq-mipi-csi2: remove wrong irq config write operation
Date
The place where this register writel() that masks one interrupt is placed
does not guarantee that the device is powered so that's not allowed. Moreover
imx8mq_mipi_csi_start_stream() masks the interrupt anyway so the
write is not even needed. Remove it as this is a mistake that slipped in
with the driver.

Fixes: f33fd8d77dd0 ("media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
drivers/staging/media/imx/imx8mq-mipi-csi2.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
index 7adbdd14daa9..8f3cc138c52c 100644
--- a/drivers/staging/media/imx/imx8mq-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
@@ -398,9 +398,6 @@ static int imx8mq_mipi_csi_s_stream(struct v4l2_subdev *sd, int enable)
struct csi_state *state = mipi_sd_to_csi2_state(sd);
int ret = 0;

- imx8mq_mipi_csi_write(state, CSI2RX_IRQ_MASK,
- CSI2RX_IRQ_MASK_ULPS_STATUS_CHANGE);
-
if (enable) {
ret = pm_runtime_resume_and_get(state->dev);
if (ret < 0)
--
2.30.2
\
 
 \ /
  Last update: 2021-12-16 10:05    [W:0.050 / U:4.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site