[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH V5 0/9] arm64: imx8mn: Enable more imx8m Nano functions
On Tue, Dec 14, 2021 at 06:46:17PM -0600, Adam Ford wrote:
> The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> different in others. With the blk-ctrl driver for Mini in place,
> this series expands the blk-ctrl driver to support the Nano which
> opens the door for additional functions in the future. As part of
> this series, it also addresses some issues in the GPCv2 driver and
> finally adds support for enabling USB and GPU.
> V5: Clean up the GPU clock assignments.
> V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset
> and add the same fixes for CSI and DSI to the Nano
> V3: Fixes an the yaml example
> V2: Fixes the clock count in the blk-ctrl
> [1] -
> Adam Ford (9):
> soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
> soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
> dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
> dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
> soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
> arm64: dts: imx8mn: add GPC node
> arm64: dts: imx8mn: put USB controller into power-domains
> arm64: dts: imx8mn: add DISP blk-ctrl
> arm64: dts: imx8mn: Enable GPU

The series introduces hard dependency between different branches. To
ease the merge process, let's postpone the DTS patches to the next


 \ /
  Last update: 2021-12-17 04:13    [W:0.174 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site