lkml.org 
[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] watchdog: s3c2410: Use platform_get_irq() to get the interrupt
From
Date
On 12/16/21 1:47 PM, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypassed the hierarchical setup and messed up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> v1->v2
> * Dropped goto and directly returned on error
> ---
> drivers/watchdog/s3c2410_wdt.c | 15 ++++++---------
> 1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 2395f353e52d..d92bc1c24182 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -513,9 +513,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct s3c2410_wdt *wdt;
> - struct resource *wdt_irq;
> unsigned int wtcon;
> int started = 0;
> + int wdt_irq;
> int ret;
>
> wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> @@ -536,12 +536,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> }
> }
>
> - wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (wdt_irq == NULL) {
> - dev_err(dev, "no irq resource specified\n");
> - ret = -ENOENT;
> - goto err;
> - }
> + wdt_irq = platform_get_irq(pdev, 0);
> + if (wdt_irq < 0)
> + return wdt_irq;
>
> /* get the memory region for the watchdog timer */
> wdt->reg_base = devm_platform_ioremap_resource(pdev, 0);
> @@ -592,8 +589,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> dev_info(dev, "default timer value is out of range, cannot start\n");
> }
>
> - ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
> - pdev->name, pdev);
> + ret = devm_request_irq(dev, wdt_irq, s3c2410wdt_irq, 0,
> + pdev->name, pdev);
> if (ret != 0) {
> dev_err(dev, "failed to install irq (%d)\n", ret);
> goto err_cpufreq;
>

\
 
 \ /
  Last update: 2021-12-17 01:26    [W:0.089 / U:2.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site