lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[Patch v2 2/3] arm64: dts: qcom: sm8150: Add support for LMh node
    Date
    Add LMh nodes for cpu cluster0 and cpu cluster1 for sm8150 SoC.

    Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
    ---
    arch/arm64/boot/dts/qcom/sm8150.dtsi | 24 ++++++++++++++++++++++++
    1 file changed, 24 insertions(+)

    diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
    index 81b4ff2cc4cd..e755d7ab78dd 100644
    --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
    +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
    @@ -3650,6 +3650,30 @@ cpufreq_hw: cpufreq@18323000 {
    #freq-domain-cells = <1>;
    };

    + lmh_cluster1: lmh@18350800 {
    + compatible = "qcom,sm8150-lmh";
    + reg = <0 0x18350800 0 0x400>;
    + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
    + cpus = <&CPU4>;
    + qcom,lmh-temp-arm-millicelsius = <60000>;
    + qcom,lmh-temp-low-millicelsius = <84500>;
    + qcom,lmh-temp-high-millicelsius = <85000>;
    + interrupt-controller;
    + #interrupt-cells = <1>;
    + };
    +
    + lmh_cluster0: lmh@18358800 {
    + compatible = "qcom,sm8150-lmh";
    + reg = <0 0x18358800 0 0x400>;
    + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
    + cpus = <&CPU0>;
    + qcom,lmh-temp-arm-millicelsius = <60000>;
    + qcom,lmh-temp-low-millicelsius = <84500>;
    + qcom,lmh-temp-high-millicelsius = <85000>;
    + interrupt-controller;
    + #interrupt-cells = <1>;
    + };
    +
    wifi: wifi@18800000 {
    compatible = "qcom,wcn3990-wifi";
    reg = <0 0x18800000 0 0x800000>;
    --
    2.25.1
    \
     
     \ /
      Last update: 2021-12-15 17:34    [W:2.794 / U:0.524 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site