lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v2 1/3] thermal: qcom: lmh: Add support for sm8150
Date
Add compatible to support LMh for sm8150 SoC.
sm8150 does not require explicit enabling for various LMh subsystems.
Add a variable indicating the same as match data which is set for sdm845.
Execute the piece of code enabling various LMh subsystems only if
enable algorithm match data is present.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---

v1->v2:
- Added LMH_ENABLE_ALGOS of_device_id match data to indicate
whether LMh subsytems need explicit enabling or not.

drivers/thermal/qcom/lmh.c | 62 +++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index eafa7526eb8b..80d26d043498 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -28,6 +28,8 @@

#define LMH_REG_DCVS_INTR_CLR 0x8

+#define LMH_ENABLE_ALGOS ((void *)1)
+
struct lmh_hw_data {
void __iomem *base;
struct irq_domain *domain;
@@ -87,6 +89,7 @@ static int lmh_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id;
struct device_node *cpu_node;
struct lmh_hw_data *lmh_data;
int temp_low, temp_high, temp_arm, cpu_id, ret;
@@ -141,32 +144,36 @@ static int lmh_probe(struct platform_device *pdev)
if (!qcom_scm_lmh_dcvsh_available())
return -EINVAL;

- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret)
- dev_err(dev, "Error %d enabling current subfunction\n", ret);
-
- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret)
- dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
-
- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret)
- dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
-
- ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
- LMH_NODE_DCVS, node_id, 0);
- if (ret) {
- dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
- return ret;
- }
-
- ret = qcom_scm_lmh_profile_change(0x1);
- if (ret) {
- dev_err(dev, "Error %d changing profile\n", ret);
- return ret;
+ of_id = of_match_device(dev->driver->of_match_table, dev);
+
+ if (of_id && of_id->data == LMH_ENABLE_ALGOS) {
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret)
+ dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+ ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+ LMH_NODE_DCVS, node_id, 0);
+ if (ret) {
+ dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+ return ret;
+ }
+
+ ret = qcom_scm_lmh_profile_change(0x1);
+ if (ret) {
+ dev_err(dev, "Error %d changing profile\n", ret);
+ return ret;
+ }
}

/* Set default thermal trips */
@@ -213,7 +220,8 @@ static int lmh_probe(struct platform_device *pdev)
}

static const struct of_device_id lmh_table[] = {
- { .compatible = "qcom,sdm845-lmh", },
+ { .compatible = "qcom,sdm845-lmh", .data = LMH_ENABLE_ALGOS},
+ { .compatible = "qcom,sm8150-lmh", },
{}
};
MODULE_DEVICE_TABLE(of, lmh_table);
--
2.25.1
\
 
 \ /
  Last update: 2021-12-15 17:34    [W:0.104 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site