lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v22] tty: Fix the keyboard led light display problem
Date
Use the "ctrl+alt+Fn" key combination to switch the system from tty to
desktop or switch the system from desktop to tty. After the switch is
completed, it is found that the state of the keyboard lock is
inconsistent with the state of the keyboard Led light.The reasons are
as follows:

* The desktop environment (Xorg and other services) is bound to a tty
(assuming it is tty1), and the kb->kbdmode attribute value of tty1
will be set to VC_OFF. According to the current code logic, in the
desktop environment, the values of ledstate and kb->ledflagstate
of tty1 will not be modified anymore, so they are always 0.

* When switching between each tty, the final value of ledstate set by
the previous tty is compared with the kb->ledflagstate value of the
current tty to determine whether to set the state of the keyboard
light. The process of switching between desktop and tty is also the
process of switching between tty1 and other ttys. There are two
situations:

- (1) In the desktop environment, tty1 will not set the ledstate,
which will cause when switching from the desktop to other ttys,
if the desktop lights up the keyboard's led, after the switch is
completed, the keyboard's led light will always be on;

- (2) When switching from another tty to the desktop, this
mechanism will trigger tty1 to set the led state. If other tty
lights up the led of the keyboard before switching to the desktop,
the led will be forcibly turned off. This situation should
be avoided.

* The current patch is to solve these problems: When VT is switched,
the keyboard led needs to be set once.Ensure that after the
switch is completed, the state of the keyboard LED is consistent
with the state of the keyboard lock.

Signed-off-by: lianzhi chang <changlianzhi@uniontech.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
v22:
Return to the v19 plan, remove the judgment condition in
the vt_set_leds_compute_shiftstate() function.

drivers/tty/vt/keyboard.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index c7fbbcdcc346..00283ba9a9e4 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -153,6 +153,7 @@ static int shift_state = 0;

static unsigned int ledstate = -1U; /* undefined */
static unsigned char ledioctl;
+static bool vt_switch;

/*
* Notifier list for console keyboard events
@@ -414,6 +415,12 @@ void vt_set_leds_compute_shiftstate(void)
{
unsigned long flags;

+ /*
+ * When VT is switched, the keyboard led needs to be set once.
+ * Ensure that after the switch is completed, the state of the
+ * keyboard LED is consistent with the state of the keyboard lock.
+ */
+ vt_switch = true;
set_leds();

spin_lock_irqsave(&kbd_event_lock, flags);
@@ -1255,6 +1262,11 @@ static void kbd_bh(struct tasklet_struct *unused)
leds |= (unsigned int)kbd->lockstate << 8;
spin_unlock_irqrestore(&led_lock, flags);

+ if (vt_switch) {
+ ledstate = ~leds;
+ vt_switch = false;
+ }
+
if (leds != ledstate) {
kbd_propagate_led_state(ledstate, leds);
ledstate = leds;
--
2.20.1


\
 
 \ /
  Last update: 2021-12-15 13:53    [W:0.033 / U:2.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site