lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
Date
Consider the GPIO controller offset (from "gpio-ranges") to compute the
maximum GPIO line number.
This fixes an issue where gpio-ranges uses a non-null offset.
e.g.: gpio-ranges = <&pinctrl 6 86 10>
In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1)

Fixes: 67e2996f72c7 ("pinctrl: stm32: fix the reported number of GPIO lines per bank")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
---
drivers/pinctrl/stm32/pinctrl-stm32.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 24764ebcc936..9ed764731570 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -1251,10 +1251,10 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
bank_nr = args.args[1] / STM32_GPIO_PINS_PER_BANK;
bank->gpio_chip.base = args.args[1];

- npins = args.args[2];
- while (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3,
- ++i, &args))
- npins += args.args[2];
+ /* get the last defined gpio line (offset + nb of pins) */
+ npins = args.args[0] + args.args[2];
+ while (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, ++i, &args))
+ npins = max(npins, (int)(args.args[0] + args.args[2]));
} else {
bank_nr = pctl->nbanks;
bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
--
2.25.1
\
 
 \ /
  Last update: 2021-12-15 10:59    [W:0.023 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site