lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next v9 6/6] net: dt-bindings: dwmac: add support for mt8195
From
Date
Dear Rob,
Thanks for your comments~
On Wed, 2021-12-15 at 16:13 -0600, Rob Herring wrote:
> On Wed, Dec 15, 2021 at 10:16:52AM +0800, Biao Huang wrote:
> > Add binding document for the ethernet on mt8195.
> >
> > Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> > ---
> > .../bindings/net/mediatek-dwmac.yaml | 42 ++++++++++++++-
> > ----
> > 1 file changed, 32 insertions(+), 10 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/mediatek-
> > dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-
> > dwmac.yaml
> > index 8ad6e19661b8..44d55146def4 100644
> > --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> > @@ -19,6 +19,7 @@ select:
> > contains:
> > enum:
> > - mediatek,mt2712-gmac
> > + - mediatek,mt8195-gmac
> > required:
> > - compatible
> >
> > @@ -27,26 +28,37 @@ allOf:
> >
> > properties:
> > compatible:
> > - items:
> > - - enum:
> > - - mediatek,mt2712-gmac
> > - - const: snps,dwmac-4.20a
> > + oneOf:
> > + - items:
> > + - enum:
> > + - mediatek,mt2712-gmac
> > + - const: snps,dwmac-4.20a
> > + - items:
> > + - enum:
> > + - mediatek,mt8195-gmac
> > + - const: snps,dwmac-5.10a
> >
> > clocks:
> > + minItems: 5
>
> As before, you need 'minItems: 4' in the previous patch.
>
> If you aren't clear what's needed, run 'make dtbs_checks' yourself
> before submitting again.

But as modified in "[PATCH net-next v9 3/6] arm64: dts: mt2712: update
ethernet device node", we expect "minItems: 5".

run 'make dtbs_checks' with "[PATCH net-next v9 3/6] arm64: dts:
mt2712: update ethernet device node" applied, will not report logs such
as "ethernet@1101c000: clock-names: ['axi', 'apb', 'mac_main',
'ptp_ref'] is too short".

Should it be fine if I keep "minItems:5"?
>
> > items:
> > - description: AXI clock
> > - description: APB clock
> > - description: MAC Main clock
> > - description: PTP clock
> > - description: RMII reference clock provided by MAC
> > + - description: MAC clock gate
> >
> > clock-names:
> > - items:
> > - - const: axi
> > - - const: apb
> > - - const: mac_main
> > - - const: ptp_ref
> > - - const: rmii_internal
> > + minItems: 5
> > + maxItems: 6
> > + contains:
>
> No, you just threw out the order requirements. And this schema will
> be
> true with just 1 of the strings below plus any other strings. For
> example, this will pass:
>
> clock-names = "foo", "bar", "axi", "baz", "rob";
I misunderstood this schema,
and how about the following description:

clock-names:
minItems: 5
maxItems: 6
items:
- const: axi
- const: apb
- const: mac_main
- const: ptp_ref
- const: rmii_internal
- const: mac_cg

Regards!
>
> > + enum:
> > + - axi
> > + - apb
> > + - mac_main
> > + - ptp_ref
> > + - rmii_internal
> > + - mac_cg
> >
> > mediatek,pericfg:
> > $ref: /schemas/types.yaml#/definitions/phandle
> > @@ -61,6 +73,8 @@ properties:
> > or will round down. Range 0~31*170.
> > For MT2712 RMII/MII interface, Allowed value need to be a
> > multiple of 550,
> > or will round down. Range 0~31*550.
> > + For MT8195 RGMII/RMII/MII interface, Allowed value need to
> > be a multiple of 290,
> > + or will round down. Range 0~31*290.
> >
> > mediatek,rx-delay-ps:
> > description:
> > @@ -69,6 +83,8 @@ properties:
> > or will round down. Range 0~31*170.
> > For MT2712 RMII/MII interface, Allowed value need to be a
> > multiple of 550,
> > or will round down. Range 0~31*550.
> > + For MT8195 RGMII/RMII/MII interface, Allowed value need to
> > be a multiple
> > + of 290, or will round down. Range 0~31*290.
> >
> > mediatek,rmii-rxc:
> > type: boolean
> > @@ -102,6 +118,12 @@ properties:
> > 3. the inside clock, which be sent to MAC, will be inversed
> > in RMII case when
> > the reference clock is from MAC.
> >
> > + mediatek,mac-wol:
> > + type: boolean
> > + description:
> > + If present, indicates that MAC supports WOL(Wake-On-LAN),
> > and MAC WOL will be enabled.
> > + Otherwise, PHY WOL is perferred.
> > +
> > required:
> > - compatible
> > - reg
> > --
> > 2.25.1
> >
> >
\
 
 \ /
  Last update: 2021-12-16 03:34    [W:0.077 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site