lkml.org 
[lkml]   [2021]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
From
Date
On 12/6/21 6:33 PM, Hans de Goede wrote:
> So far the extcon-intel-cht-wc code has only been tested on devices with
> a Type-C connector with USB-PD, USB3 (superspeed) and DP-altmode support
> through a FUSB302 Type-C controller.
>
> Some devices with the intel-cht-wc PMIC however come with an USB-micro-B
> connector, or an USB-2 only Type-C connector without USB-PD.
>
> Which device-model we are running on can be identified with the new
> cht_wc_model intel_soc_pmic field. On models without a Type-C controller
> the extcon code must control the Vbus 5V boost converter and the USB role
> switch depending on the detected cable-type.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v3:
> - Some minor tweaks / spelling fixes based on Andy's review
> ---
> drivers/extcon/Kconfig | 2 +
> drivers/extcon/extcon-intel-cht-wc.c | 91 ++++++++++++++++++++++++++++
> 2 files changed, 93 insertions(+)

[snip]

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2021-12-16 03:32    [W:0.158 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site