lkml.org 
[lkml]   [2021]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
On Tue, Dec 07, 2021 at 04:37:24PM -0800, Florian Fainelli wrote:
> Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
> to help with validation.
>
> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> .../bindings/ata/brcm,sata-brcm.txt | 45 ---------
> .../bindings/ata/brcm,sata-brcm.yaml | 98 +++++++++++++++++++
> 2 files changed, 98 insertions(+), 45 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
> create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
>
> diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
> deleted file mode 100644
> index b9ae4ce4a0a0..000000000000
> --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
> +++ /dev/null
> @@ -1,45 +0,0 @@
> -* Broadcom SATA3 AHCI Controller
> -
> -SATA nodes are defined to describe on-chip Serial ATA controllers.
> -Each SATA controller should have its own node.
> -
> -Required properties:
> -- compatible : should be one or more of
> - "brcm,bcm7216-ahci"
> - "brcm,bcm7425-ahci"
> - "brcm,bcm7445-ahci"
> - "brcm,bcm-nsp-ahci"
> - "brcm,sata3-ahci"
> - "brcm,bcm63138-ahci"
> -- reg : register mappings for AHCI and SATA_TOP_CTRL
> -- reg-names : "ahci" and "top-ctrl"
> -- interrupts : interrupt mapping for SATA IRQ
> -
> -Optional properties:
> -
> -- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
> - pointing to the RESCAL reset controller provider node.
> -- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
> -
> -Also see ahci-platform.txt.
> -
> -Example:
> -
> - sata@f045a000 {
> - compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
> - reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
> - reg-names = "ahci", "top-ctrl";
> - interrupts = <0 30 0>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - sata0: sata-port@0 {
> - reg = <0>;
> - phys = <&sata_phy 0>;
> - };
> -
> - sata1: sata-port@1 {
> - reg = <1>;
> - phys = <&sata_phy 1>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
> new file mode 100644
> index 000000000000..3e24f45c65af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom SATA3 AHCI Controller
> +
> +description:
> + SATA nodes are defined to describe on-chip Serial ATA controllers.
> + Each SATA controller should have its own node.
> +
> +maintainers:
> + - Florian Fainelli <f.fainelli@gmail.com>
> +
> +allOf:
> + - $ref: sata-common.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - brcm,bcm7216-ahci
> + - const: brcm,sata3-ahci
> + - items:
> + - enum:
> + - brcm,bcm7445-ahci
> + - const: brcm,sata3-ahci
> + - items:
> + - enum:
> + - brcm,bcm7425-ahci
> + - const: brcm,sata3-ahci
> + - items:
> + - const: brcm,bcm-nsp-ahci
> + - items:
> + - enum:
> + - brcm,bcm63138-ahci
> + - const: brcm,sata3-ahci

Is there some reason this is not grouped into 2 oneOf entries? If not, I
can fixup.

> +
> + reg:
> + minItems: 2
> + maxItems: 2
> +
> + reg-names:
> + items:
> + - const: ahci
> + - const: top-ctrl
> +
> + interrupts: true

maxItems: 1 ?

> +
> + dma-coherent: true
> +
> +if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - brcm,bcm7216-ahci
> + - brcm,bcm63138-ahci
> +then:
> + properties:
> + resets:
> + maxItems: 1
> + reset-names:
> + enum:
> + - rescal
> + - ahci
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#address-cells"
> + - "#size-cells"
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + sata@f045a000 {
> + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
> + reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
> + reg-names = "ahci", "top-ctrl";
> + interrupts = <0 30 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sata0: sata-port@0 {
> + reg = <0>;
> + phys = <&sata_phy 0>;
> + };
> +
> + sata1: sata-port@1 {
> + reg = <1>;
> + phys = <&sata_phy 1>;
> + };
> + };
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2021-12-14 20:11    [W:0.195 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site