[lkml]   [2021]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 0/4] Rx mode support for Cadence DPHY

This series adds support for Cadence DPHY Rx driver. It has been split
off from [0] to facilitate easier merging. I have still kept the version
number to maintain continuity with the previous patches. The earlier
version used the same binding for Tx and Rx DPHY. With the separate
driver, I have added a separate binding. But I am still keeping the old
conversion patch in this series since I have already done the work in
converting the binding to yaml, might as well get it merged.

Tested on TI's J721E with OV5640 sensor.


Changes in v6:
- Add a new binding for DPHY Rx.
- Move the DPHY Rx part to a separate driver.
- Drop Rx specific changes from the cdns,dphy.yaml binding. Keep those
in cdns,dphy-rx.yaml

Changes in v5:
- Use the new cdns_dphy_info to specify PHY ops.
- Re-order include in alphabetical order.
- Make bands const.
- Drop num_bands.
- Make i, lanes unsigned.
- Drop the maximum check in cdns_dphy_rx_get_band_ctrl(). Let the loop
complete and return -EOPNOTSUPP when we reach the end.
- Drop the "rate < bands[i].min_rate" check since the bands are in
ascending order.
- Move data_lane_ctrl to start of function and make it static const.

Changes in v4:
- Drop the submode parts. Use a different compatible for the Rx ops.
- Make bands and num_bands static.
- Drop the submode patches. Use a different compatible for Rx mode DPHY

Changes in v3:
- Use a table to select the band.
- Use a table to poll the data lane ready bits.
- Multiply the DPHY HS clock rate by 2 to get the bit rate since the
clock is DDR.
- Add Rob's R-by.

Changes in v2:
- Drop reg description.
- Add a description for each DPHY clock.
- Rename dphy@... to phy@... in example.
- Add Laurent's R-by.
- Re-order subject prefixes.
- Add power-domain to the example.
- Add Laurent's R-by.
- Re-order subject prefixes.

Pratyush Yadav (4):
phy: cadence: Add Cadence D-PHY Rx driver
phy: dt-bindings: Convert Cadence DPHY binding to YAML
phy: dt-bindings: cdns,dphy: add power-domains property
phy: dt-bindings: Add Cadence D-PHY Rx bindings

.../devicetree/bindings/phy/cdns,dphy-rx.yaml | 42 +++
.../devicetree/bindings/phy/cdns,dphy.txt | 20 --
.../devicetree/bindings/phy/cdns,dphy.yaml | 56 ++++
drivers/phy/cadence/Kconfig | 8 +
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/cdns-dphy-rx.c | 250 ++++++++++++++++++
6 files changed, 357 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
create mode 100644 drivers/phy/cadence/cdns-dphy-rx.c


 \ /
  Last update: 2021-12-14 19:08    [W:1.092 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site