lkml.org 
[lkml]   [2021]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
Hi Rob,

Thank you for the review.

On Mon, Dec 13, 2021 at 10:58 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, Dec 07, 2021 at 01:23:49AM +0000, Lad Prabhakar wrote:
> > Document the CRU block found on Renesas RZ/G2L SoC's.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > .../bindings/media/renesas,rzg2l-cru.yaml | 227 ++++++++++++++++++
> > 1 file changed, 227 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > new file mode 100644
> > index 000000000000..7b2835810516
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> > @@ -0,0 +1,227 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2021 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> > +
> > +maintainers:
> > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> > + capabilities for the Renesas RZ/G2L family of devices.
> > +
> > + Depending on the instance the Image Processing input is connected to
> > + external SoC pins or to a CSI-2 receiver.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
>
> Don't need oneOf with only 1 entry.
>
I added this as there will be couple of more SoC's using this driver.

> > + - enum:
> > + - renesas,r9a07g044-cru # RZ/G2{L,LC}
> > + - const: renesas,rzg2l-cru
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 4
> > +
> > + interrupt-names:
> > + items:
> > + - const: csi2_link_int
> > + - const: image_conv_int
> > + - const: image_conv_err_int
> > + - const: axi_mst_err_int
>
> _int is redundant.
>
Agreed will drop "_int".

> > +
> > + clocks:
> > + items:
> > + - description: Internal clock for connecting CRU and MIPI
> > + - description: CRU Main clock
> > + - description: CPU Register access clock
> > + - description: CRU image transfer clock
> > +
> > + clock-names:
> > + items:
> > + - const: sysclk
> > + - const: vclk
> > + - const: pclk
> > + - const: aclk
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + resets:
> > + items:
> > + - description: CRU_CMN_RSTB reset terminal
> > + - description: CRU_PRESETN reset terminal
> > + - description: CRU_ARESETN reset terminal
> > +
> > + reset-names:
> > + items:
> > + - const: cmn-rstb
> > + - const: presetn
> > + - const: aresetn
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing a parallel input source.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + hsync-active: true
> > +
> > + vsync-active: true
> > +
> > + bus-width: true
> > +
> > + data-shift: true
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description:
> > + Input port node, single endpoint describing the CSI-2 transmitter.
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + clock-lanes:
> > + maxItems: 1
> > +
> > + data-lanes:
> > + maxItems: 1
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + port@2:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Output port node, describing the RZ/G2L Image Processing module
> > + connected the CSI-2 receiver
> > +
> > + properties:
> > + endpoint@0:
>
> Unless you have mutiple endpoints to define or endpoint properties to
> add, you don't need to specify anything more than the port.
>
Agreed will drop it.

Cheers,
Prabhakar

> > + $ref: /schemas/graph.yaml#/properties/endpoint
> > + description: Endpoint connected to CSI2.
> > +
> > + anyOf:
> > + - required:
> > + - endpoint@0
> > +
> > + port@3:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Input port node, describing the RZ/G2L CSI-2 module connected the
> > + Image Processing block.
> > +
> > + properties:
> > + endpoint@0:
> > + $ref: /schemas/graph.yaml#/properties/endpoint
> > + description: Endpoint connected to CSI2.
> > +
> > + anyOf:
> > + - required:
> > + - endpoint@0
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-names
> > + - clocks
> > + - clock-names
> > + - resets
> > + - reset-names
> > + - power-domains
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # Device node example with CSI-2
> > + - |
> > + #include <dt-bindings/clock/r9a07g044-cpg.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + cru: video@10830000 {
> > + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> > + reg = <0x10830000 0x10000>;
> > + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "csi2_link_int", "image_conv_int",
> > + "image_conv_err_int", "axi_mst_err_int";
> > + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> > + <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> > + clock-names = "sysclk", "vclk", "pclk", "aclk";
> > + power-domains = <&cpg>;
> > + resets = <&cpg R9A07G044_CRU_CMN_RSTB>,
> > + <&cpg R9A07G044_CRU_PRESETN>,
> > + <&cpg R9A07G044_CRU_ARESETN>;
> > + reset-names = "cmn-rstb", "presetn", "aresetn";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <1>;
> > +
> > + csi2_in: endpoint@0 {
> > + reg = <0>;
> > + clock-lanes = <0>;
> > + data-lanes = <1 2>;
> > + remote-endpoint = <&ov5645_ep>;
> > + };
> > + };
> > +
> > + port@2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <2>;
> > +
> > + csi2cru: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint= <&crucsi2>;
> > + };
> > + };
> > +
> > + port@3 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <3>;
> > +
> > + crucsi2: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint= <&csi2cru>;
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.17.1
> >
> >

\
 
 \ /
  Last update: 2021-12-14 13:09    [W:0.060 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site