lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] acpi: Store _PLD information and convert users
Date
Hi,

I'm now using the helpers device_match_acpi_dev() and
device_match_fwnode() like Andy suggested. No other changes.


The original cover letter:

This removes the need for the drivers to always separately evaluate
the _PLD. With the USB Type-C connector and USB port mapping this
allows us to start using the component framework and remove the custom
APIs.

So far the only users of the _PLD information have been the USB
drivers, but it seems it will be used also at least in some camera
drivers later. These nevertheless touch mostly USB drivers.

Rafael, is it still OK if Greg takes these?

Prashant, can you test these?

thanks,


Heikki Krogerus (5):
acpi: Store the Physical Location of Device (_PLD) information
usb: Use the cached ACPI _PLD entry
usb: Link the ports to the connectors they are attached to
usb: typec: port-mapper: Convert to the component framework
usb: Remove usb_for_each_port()

Documentation/ABI/testing/sysfs-bus-usb | 9 +
drivers/acpi/scan.c | 79 +++++++
drivers/usb/core/port.c | 32 +++
drivers/usb/core/usb-acpi.c | 17 +-
drivers/usb/core/usb.c | 46 ----
drivers/usb/typec/Makefile | 3 +-
drivers/usb/typec/class.c | 2 -
drivers/usb/typec/class.h | 10 +-
drivers/usb/typec/port-mapper.c | 280 +++---------------------
include/acpi/acpi_bus.h | 14 ++
include/linux/usb.h | 9 -
include/linux/usb/typec.h | 12 -
12 files changed, 184 insertions(+), 329 deletions(-)

--
2.33.0

\
 
 \ /
  Last update: 2021-12-13 11:34    [W:0.106 / U:1.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site