lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] gpio: msc313: Add gpio support for ssd20xd
Date
Hi Linus and Bartosz,

As suggested by Linus I have dropped the DTS commits that were
in the series to add a usage of this code to a target.
If possible can you take the first 4 commits for the GPIO driver
for me? The final DTS commit will go via our tree.

Original blurb:

This is a little series to add a compatible string for the Sigmastar
SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
for the pins on these chips.

Changes since v2:
- No code changes, dropped the UnitV2 DTS bits.
I'll send a new series for that later.

Changes since v1:
- Add a fix for the led binding to squash the warning about the
activity trigger in the unitv2 dts.
- Fix up the regulator node names so they pass dtb check

Daniel Palmer (5):
dt-bindings: gpio: msc313: Add compatible for ssd20xd
dt-bindings: gpio: msc313: Add offsets for ssd20xd
gpio: msc313: Code clean ups
gpio: msc313: Add support for SSD201 and SSD202D
ARM: dts: mstar: Set gpio compatible for ssd20xd

.../bindings/gpio/mstar,msc313-gpio.yaml | 4 +-
.../boot/dts/mstar-infinity2m-ssd20xd.dtsi | 5 +
drivers/gpio/gpio-msc313.c | 266 +++++++++++++++++-
include/dt-bindings/gpio/msc313-gpio.h | 71 +++++
4 files changed, 341 insertions(+), 5 deletions(-)

--
2.34.1

\
 
 \ /
  Last update: 2021-12-13 11:10    [W:0.130 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site