lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/4] can: dev: add sanity check in can_set_static_ctrlmode()
Date
Previous patch removed can_priv::ctrlmode_static to replace it with
can_get_static_ctrlmode().

A condition sine qua non for this to work is that the controller
static modes should never be set in can_priv::ctrlmode_supported
(c.f. the comment on can_priv::ctrlmode_supported which states that it
is for "options that can be *modified* by netlink"). Also, this
condition is already correctly fulfilled by all existing drivers
which rely on the ctrlmode_static feature.

Nonetheless, we added an extra safeguard in can_set_static_ctrlmode()
to return an error value and to warn the developer who would be
adventurous enough to set to static a given feature that is already
set to supported.

The drivers which rely on the static controller mode are then updated
to check the return value of can_set_static_ctrlmode().

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
--

Some few comments on how the rcar_canfd and m_can drivers free their
allocated resources when an error occurs during probing.

The function rcar_canfd_channel_probe() is quite inconsistent with the
way it handles errors. After the call to alloc_candev, there are
several "goto fail" statements that would directly exit without
calling free_candev()!

Nonetheless, later on the driver will check the return value of
rcar_canfd_channel_probe() and call rcar_canfd_channel_remove() which
will correctly call free_candev(). Even if this is inconsistent, there
is no sign of a memory leak. So I just applied the change the
can_set_static_ctrlmode() without bothering more (N.B. I do not own
that device so I am not willing to take the risk of making bigger
changes because I can not test).

On the other hand, m_can_dev_setup() is fine: the return value is
checked by the caller and necessary actions are taken.

As such, for both driver, we did a minimal change.
---
drivers/net/can/m_can/m_can.c | 10 +++++++---
drivers/net/can/rcar/rcar_canfd.c | 4 +++-
include/linux/can/dev.h | 11 +++++++++--
3 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index c2a8421e7845..56af9ea4694f 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1463,7 +1463,7 @@ static bool m_can_niso_supported(struct m_can_classdev *cdev)
static int m_can_dev_setup(struct m_can_classdev *cdev)
{
struct net_device *dev = cdev->net;
- int m_can_version;
+ int m_can_version, err;

m_can_version = m_can_check_core_release(cdev);
/* return if unsupported version */
@@ -1493,7 +1493,9 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
switch (cdev->version) {
case 30:
/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
- can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
+ err = can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
+ if (err)
+ return err;
cdev->can.bittiming_const = cdev->bit_timing ?
cdev->bit_timing : &m_can_bittiming_const_30X;

@@ -1503,7 +1505,9 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
break;
case 31:
/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
- can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
+ err = can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
+ if (err)
+ return err;
cdev->can.bittiming_const = cdev->bit_timing ?
cdev->bit_timing : &m_can_bittiming_const_31X;

diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index ff9d0f5ae0dd..e225c1c03812 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1706,7 +1706,9 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
&rcar_canfd_data_bittiming_const;

/* Controller starts in CAN FD only mode */
- can_set_static_ctrlmode(ndev, CAN_CTRLMODE_FD);
+ err = can_set_static_ctrlmode(ndev, CAN_CTRLMODE_FD);
+ if (err)
+ goto fail;
priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING;
} else {
/* Controller starts in Classical CAN only mode */
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 92e2d69462f0..fff3f70df697 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -131,17 +131,24 @@ static inline s32 can_get_relative_tdco(const struct can_priv *priv)
}

/* helper to define static CAN controller features at device creation time */
-static inline void can_set_static_ctrlmode(struct net_device *dev,
- u32 static_mode)
+static inline int __must_check can_set_static_ctrlmode(struct net_device *dev,
+ u32 static_mode)
{
struct can_priv *priv = netdev_priv(dev);

/* alloc_candev() succeeded => netdev_priv() is valid at this point */
+ if (priv->ctrlmode_supported & static_mode) {
+ netdev_warn(dev,
+ "Controller features can not be supported and static at the same time\n");
+ return -EINVAL;
+ }
priv->ctrlmode = static_mode;

/* override MTU which was set by default in can_setup()? */
if (static_mode & CAN_CTRLMODE_FD)
dev->mtu = CANFD_MTU;
+
+ return 0;
}

static inline u32 can_get_static_ctrlmode(struct can_priv *priv)
--
2.32.0
\
 
 \ /
  Last update: 2021-12-13 17:03    [W:0.266 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site