lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 19/23] media: atmel: atmel-isc-base: clamp wb gain coefficients
Date
White balance computed gains can overflow above the 13 bits hardware
coefficient that can be used, in some specific scenarios like a subexposure
from the sensor when the image is mostly black.
In this case the computed gain has to be clamped to the maximum value
allowed by the hardware.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/media/platform/atmel/atmel-isc-base.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index f1f1019f9d82..31c8e3029eee 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1415,6 +1415,10 @@ static void isc_wb_update(struct isc_ctrls *ctrls)
/* multiply both gains and adjust for decimals */
ctrls->gain[c] = s_gain[c] * gw_gain[c];
ctrls->gain[c] >>= 9;
+
+ /* make sure we are not out of range */
+ ctrls->gain[c] = clamp_val(ctrls->gain[c], 0, GENMASK(12, 0));
+
v4l2_dbg(1, debug, &isc->v4l2_dev,
"isc wb: component %d, final gain %u\n",
c, ctrls->gain[c]);
--
2.25.1
\
 
 \ /
  Last update: 2021-12-13 14:56    [W:0.679 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site