lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: at91: sama5d2: Name the qspi clock
From
Date
On 09/12/2021 at 11:25, Tudor Ambarus wrote:
> Naming clocks is a good practice. The atmel-quadspi driver supports
> an unnamed clock for the peripheral clock in order to be backward
> compatible with old DTs, but it is recommended to name the clocks
> on new DTs. The driver's bindings file requires the clock-names
> property, so name the clock.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Queued in at91-dt branch for 5.17.
Best regards,
Nicolas

> ---
> arch/arm/boot/dts/sama5d2.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> index 801969c113d6..09c741e8ecb8 100644
> --- a/arch/arm/boot/dts/sama5d2.dtsi
> +++ b/arch/arm/boot/dts/sama5d2.dtsi
> @@ -288,6 +288,7 @@ qspi0: spi@f0020000 {
> reg-names = "qspi_base", "qspi_mmap";
> interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
> + clock-names = "pclk";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -299,6 +300,7 @@ qspi1: spi@f0024000 {
> reg-names = "qspi_base", "qspi_mmap";
> interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
> + clock-names = "pclk";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
>


--
Nicolas Ferre

\
 
 \ /
  Last update: 2021-12-13 14:48    [W:0.025 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site