Messages in this thread | | | Subject | Re: [PATCH v4 07/13] clk: imx: Add initial support for i.MXRT clock driver | From | Giulio Benetti <> | Date | Mon, 13 Dec 2021 13:05:54 +0100 |
| |
Hi Abel,
On 13/12/21 12:30, Abel Vesa wrote: > On 21-12-04 01:10:36, Jesse Taube wrote: >> Add clock driver support for i.MXRT1***s starting with the i.MXRT1050. >> >> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> >> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> >> --- >> V1->V2: >> * Kconfig: Add new line >> * clk-imxrt.c: Remove unused const >> * clk-imxrt.c: Remove set parents >> * clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address >> V2->V3: >> * Remove unused ANATOP_BASE_ADDR >> * Move to hw API >> * Add GPT's own clock >> * Add SEMC clocks to set muxing to CRITICAL >> V3->V4: >> * Rename clk-imxrt.c to clk-imxrt1050.c >> * Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050 >> * Make CONFIG_CLK_IMXRT1050 selectable >> --- >> drivers/clk/imx/Kconfig | 5 + >> drivers/clk/imx/Makefile | 1 + >> drivers/clk/imx/clk-imxrt1050.c | 156 ++++++++++++++++++++++++++++++++ >> 3 files changed, 162 insertions(+) >> create mode 100644 drivers/clk/imx/clk-imxrt1050.c >> >> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig >> index c08edbd04d22..f697652ab19c 100644 >> --- a/drivers/clk/imx/Kconfig >> +++ b/drivers/clk/imx/Kconfig >> @@ -105,3 +105,8 @@ config CLK_IMX8ULP >> select MXC_CLK >> help >> Build the driver for i.MX8ULP CCM Clock Driver >> + >> +config CLK_IMXRT1050 >> + bool "IMXRT1050 CCM Clock Driver" >> + depends on SOC_IMXRT >> + select MXC_CLK >> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile >> index b5e040026dfb..3d9a1e3b5fc6 100644 >> --- a/drivers/clk/imx/Makefile >> +++ b/drivers/clk/imx/Makefile >> @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o >> obj-$(CONFIG_CLK_IMX7D) += clk-imx7d.o >> obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o >> obj-$(CONFIG_CLK_VF610) += clk-vf610.o >> +obj-$(CONFIG_CLK_IMXRT1050) += clk-imxrt1050.o >> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c >> new file mode 100644 >> index 000000000000..85ba1a240335 >> --- /dev/null >> +++ b/drivers/clk/imx/clk-imxrt1050.c >> @@ -0,0 +1,156 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * Copyright (C) 2021 >> + * Author(s): >> + * Jesse Taube <Mr.Bossman075@gmail.com> >> + * Giulio Benetti <giulio.benetti@benettiengineering.com> >> + */ >> +#include <linux/mm.h> >> +#include <linux/delay.h> >> +#include <linux/clk.h> >> +#include <linux/io.h> >> +#include <linux/clkdev.h> >> +#include <linux/clk-provider.h> >> +#include <linux/err.h> >> +#include <linux/of.h> >> +#include <linux/of_address.h> >> +#include <linux/of_irq.h> >> +#include <linux/sizes.h> >> +#include <soc/imx/revision.h> >> +#include <dt-bindings/clock/imxrt1050-clock.h> >> + >> +#include "clk.h" >> + >> +static const char * const pll_ref_sels[] = {"osc", "dummy", }; >> +static const char * const per_sels[] = {"ipg_pdof", "osc", }; >> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; >> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; >> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; >> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; >> +static const char *const pre_periph_sels[] = { >> + "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; >> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; >> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; >> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; >> +static const char *const lcdif_sels[] = { >> + "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", >> + "pll2_pfd1_594m", "pll3_pfd1_664_62m", }; >> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; >> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; >> + >> +static struct clk_hw **hws; >> +static struct clk_hw_onecell_data *clk_hw_data; >> + >> +static void __init imxrt_clocks_common_init(void __iomem *base) >> +{ >> + /* Anatop clocks */ >> + hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL); >> + >> + hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel", >> + base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel", >> + base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel", >> + base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel", >> + base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels)); >> + >> + hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm", >> + "pll1_arm_ref_sel", base + 0x0, 0x7f); >> + hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", >> + "pll2_sys_ref_sel", base + 0x30, 0x1); >> + hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", >> + "pll3_usb_otg_ref_sel", base + 0x10, 0x1); >> + hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video", >> + "pll5_video_ref_sel", base + 0xa0, 0x7f); >> + >> + /* PLL bypass out */ >> + hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1, >> + pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, >> + pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, >> + pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); >> + hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, >> + pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); >> + >> + hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel", >> + "pll5_video", base + 0xa0, 19, 2); >> + hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div", >> + "video_post_div_sel", base + 0x170, 30, 2); >> + >> + hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); >> + >> + hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0); >> + hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1); >> + hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2); >> + hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1); >> + hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3); >> +} >> + >> +static void __init imxrt1050_clocks_init(struct device_node *np) >> +{ >> + void __iomem *ccm_base; >> + void __iomem *pll_base; >> + struct device_node *anp; >> + >> + clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, >> + IMXRT1050_CLK_END), GFP_KERNEL); >> + if (WARN_ON(!clk_hw_data)) >> + return; >> + >> + clk_hw_data->num = IMXRT1050_CLK_END; >> + hws = clk_hw_data->hws; >> + >> + hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc")); >> + >> + anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop"); >> + pll_base = of_iomap(anp, 0); >> + WARN_ON(!pll_base); >> + imxrt_clocks_common_init(pll_base); >> + /* CCM clocks */ >> + ccm_base = of_iomap(np, 0); >> + WARN_ON(!ccm_base); >> + >> + hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3); >> + hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2, >> + pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); >> + hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1, >> + periph_sels, ARRAY_SIZE(periph_sels)); >> + hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1, >> + usdhc_sels, ARRAY_SIZE(usdhc_sels)); >> + hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1, >> + usdhc_sels, ARRAY_SIZE(usdhc_sels)); >> + hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1, >> + lpuart_sels, ARRAY_SIZE(lpuart_sels)); >> + hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3, >> + lcdif_sels, ARRAY_SIZE(lcdif_sels)); >> + hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1, >> + per_sels, ARRAY_SIZE(per_sels)); >> + hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1, >> + semc_alt_sels, ARRAY_SIZE(semc_alt_sels)); >> + hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1, >> + semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL); >> + >> + hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3); >> + hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2); >> + hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5); >> + >> + hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3); >> + hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3); >> + hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6); >> + hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3); >> + hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3); >> + >> + hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2); >> + hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4); >> + hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24); >> + hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10); >> + hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6); >> + hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7); >> + hws[IMXRT1050_CLK_GPT] = imx_clk_hw_fixed_factor("gpt", "osc", 1, 8); >> + imx_check_clk_hws(hws, IMXRT1050_CLK_END); >> + >> + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); >> +} >> +CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init); > > I would suggest module platform driver instead.
Can you please point us an example?
> Sorry for the late review.
No problem
Thank you Best regards -- Giulio Benetti Benetti Engineering sas
| |