lkml.org 
[lkml]   [2021]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v8 4/6] net: dt-bindings: dwmac: Convert mediatek-dwmac to DT schema
On Fri, Dec 10, 2021 at 09:31:27AM +0800, Biao Huang wrote:
> Convert mediatek-dwmac to DT schema, and delete old mediatek-dwmac.txt.
> And there are some changes in .yaml than .txt, others almost keep the same:
> 1. compatible "const: snps,dwmac-4.20".
> 2. delete "snps,reset-active-low;" in example, since driver remove this
> property long ago.
> 3. add "snps,reset-delay-us = <0 10000 10000>" in example.
> 4. the example is for rgmii interface, keep related properties only.
>
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> ---
> .../bindings/net/mediatek-dwmac.txt | 91 ----------
> .../bindings/net/mediatek-dwmac.yaml | 156 ++++++++++++++++++
> 2 files changed, 156 insertions(+), 91 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> create mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> deleted file mode 100644
> index afbcaebf062e..000000000000
> --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> +++ /dev/null
> @@ -1,91 +0,0 @@
> -MediaTek DWMAC glue layer controller
> -
> -This file documents platform glue layer for stmmac.
> -Please see stmmac.txt for the other unchanged properties.
> -
> -The device node has following properties.
> -
> -Required properties:
> -- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC
> -- reg: Address and length of the register set for the device
> -- interrupts: Should contain the MAC interrupts
> -- interrupt-names: Should contain a list of interrupt names corresponding to
> - the interrupts in the interrupts property, if available.
> - Should be "macirq" for the main MAC IRQ
> -- clocks: Must contain a phandle for each entry in clock-names.
> -- clock-names: The name of the clock listed in the clocks property. These are
> - "axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
> -- mac-address: See ethernet.txt in the same directory
> -- phy-mode: See ethernet.txt in the same directory
> -- mediatek,pericfg: A phandle to the syscon node that control ethernet
> - interface and timing delay.
> -
> -Optional properties:
> -- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
> - It should be defined for RGMII/MII interface.
> - It should be defined for RMII interface when the reference clock is from MT2712 SoC.
> -- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
> - It should be defined for RGMII/MII interface.
> - It should be defined for RMII interface.
> -Both delay properties need to be a multiple of 170 for RGMII interface,
> -or will round down. Range 0~31*170.
> -Both delay properties need to be a multiple of 550 for MII/RMII interface,
> -or will round down. Range 0~31*550.
> -
> -- mediatek,rmii-rxc: boolean property, if present indicates that the RMII
> - reference clock, which is from external PHYs, is connected to RXC pin
> - on MT2712 SoC.
> - Otherwise, is connected to TXC pin.
> -- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
> - MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
> -- mediatek,txc-inverse: boolean property, if present indicates that
> - 1. tx clock will be inversed in MII/RGMII case,
> - 2. tx clock inside MAC will be inversed relative to reference clock
> - which is from external PHYs in RMII case, and it rarely happen.
> - 3. the reference clock, which outputs to TXC pin will be inversed in RMII case
> - when the reference clock is from MT2712 SoC.
> -- mediatek,rxc-inverse: boolean property, if present indicates that
> - 1. rx clock will be inversed in MII/RGMII case.
> - 2. reference clock will be inversed when arrived at MAC in RMII case, when
> - the reference clock is from external PHYs.
> - 3. the inside clock, which be sent to MAC, will be inversed in RMII case when
> - the reference clock is from MT2712 SoC.
> -- assigned-clocks: mac_main and ptp_ref clocks
> -- assigned-clock-parents: parent clocks of the assigned clocks
> -
> -Example:
> - eth: ethernet@1101c000 {
> - compatible = "mediatek,mt2712-gmac";
> - reg = <0 0x1101c000 0 0x1300>;
> - interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
> - interrupt-names = "macirq";
> - phy-mode ="rgmii-rxid";
> - mac-address = [00 55 7b b5 7d f7];
> - clock-names = "axi",
> - "apb",
> - "mac_main",
> - "ptp_ref",
> - "rmii_internal";
> - clocks = <&pericfg CLK_PERI_GMAC>,
> - <&pericfg CLK_PERI_GMAC_PCLK>,
> - <&topckgen CLK_TOP_ETHER_125M_SEL>,
> - <&topckgen CLK_TOP_ETHER_50M_SEL>,
> - <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
> - assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
> - <&topckgen CLK_TOP_ETHER_50M_SEL>,
> - <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
> - assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
> - <&topckgen CLK_TOP_APLL1_D3>,
> - <&topckgen CLK_TOP_ETHERPLL_50M>;
> - power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
> - mediatek,pericfg = <&pericfg>;
> - mediatek,tx-delay-ps = <1530>;
> - mediatek,rx-delay-ps = <1530>;
> - mediatek,rmii-rxc;
> - mediatek,txc-inverse;
> - mediatek,rxc-inverse;
> - snps,txpbl = <1>;
> - snps,rxpbl = <1>;
> - snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> - snps,reset-active-low;
> - };
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> new file mode 100644
> index 000000000000..9207266a6e69
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> @@ -0,0 +1,156 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek DWMAC glue layer controller
> +
> +maintainers:
> + - Biao Huang <biao.huang@mediatek.com>
> +
> +description:
> + This file documents platform glue layer for stmmac.
> +
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2712-gmac
> + required:
> + - compatible
> +
> +allOf:
> + - $ref: "snps,dwmac.yaml#"
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:

Don't need oneOf for 1 entry.

> + - enum:
> + - mediatek,mt2712-gmac
> + - const: snps,dwmac-4.20a
> +
> + clocks:
> + items:
> + - description: AXI clock
> + - description: APB clock
> + - description: MAC Main clock
> + - description: PTP clock
> + - description: RMII reference clock provided by MAC

Seems you need 'minItems: 4' or are the DT files wrong?

> +
> + clock-names:
> + items:
> + - const: axi
> + - const: apb
> + - const: mac_main
> + - const: ptp_ref
> + - const: rmii_internal
> +
> + mediatek,pericfg:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + The phandle to the syscon node that control ethernet
> + interface and timing delay.
> +
> + mediatek,tx-delay-ps:
> + description:
> + The internal TX clock delay (provided by this driver) in nanoseconds.
> + For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
> + or will round down. Range 0~31*170.
> + For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
> + or will round down. Range 0~31*550.
> +
> + mediatek,rx-delay-ps:
> + description:
> + The internal RX clock delay (provided by this driver) in nanoseconds.
> + For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
> + or will round down. Range 0~31*170.
> + For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
> + or will round down. Range 0~31*550.
> +
> + mediatek,rmii-rxc:
> + type: boolean
> + description:
> + If present, indicates that the RMII reference clock, which is from external
> + PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
> +
> + mediatek,rmii-clk-from-mac:
> + type: boolean
> + description:
> + If present, indicates that MAC provides the RMII reference clock, which
> + outputs to TXC pin only.
> +
> + mediatek,txc-inverse:
> + type: boolean
> + description:
> + If present, indicates that
> + 1. tx clock will be inversed in MII/RGMII case,
> + 2. tx clock inside MAC will be inversed relative to reference clock
> + which is from external PHYs in RMII case, and it rarely happen.
> + 3. the reference clock, which outputs to TXC pin will be inversed in RMII case
> + when the reference clock is from MAC.
> +
> + mediatek,rxc-inverse:
> + type: boolean
> + description:
> + If present, indicates that
> + 1. rx clock will be inversed in MII/RGMII case.
> + 2. reference clock will be inversed when arrived at MAC in RMII case, when
> + the reference clock is from external PHYs.
> + 3. the inside clock, which be sent to MAC, will be inversed in RMII case when
> + the reference clock is from MAC.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - phy-mode
> + - mediatek,pericfg
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt2712-clk.h>
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/power/mt2712-power.h>
> +
> + eth: ethernet@1101c000 {
> + compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
> + reg = <0x1101c000 0x1300>;
> + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "macirq";
> + phy-mode ="rgmii-rxid";
> + mac-address = [00 55 7b b5 7d f7];
> + clock-names = "axi",
> + "apb",
> + "mac_main",
> + "ptp_ref",
> + "rmii_internal";
> + clocks = <&pericfg CLK_PERI_GMAC>,
> + <&pericfg CLK_PERI_GMAC_PCLK>,
> + <&topckgen CLK_TOP_ETHER_125M_SEL>,
> + <&topckgen CLK_TOP_ETHER_50M_SEL>,
> + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
> + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
> + <&topckgen CLK_TOP_ETHER_50M_SEL>,
> + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
> + <&topckgen CLK_TOP_APLL1_D3>,
> + <&topckgen CLK_TOP_ETHERPLL_50M>;
> + power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
> + mediatek,pericfg = <&pericfg>;
> + mediatek,tx-delay-ps = <1530>;
> + snps,txpbl = <1>;
> + snps,rxpbl = <1>;
> + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> + snps,reset-delays-us = <0 10000 10000>;
> + };
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2021-12-10 19:50    [W:0.376 / U:2.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site