lkml.org 
[lkml]   [2021]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v8 01/40] x86/compressed/64: detect/setup SEV/SME features earlier in boot
    Date
    From: Michael Roth <michael.roth@amd.com>

    With upcoming SEV-SNP support, SEV-related features need to be
    initialized earlier in boot, at the same point the initial #VC handler
    is set up, so that the SEV-SNP CPUID table can be utilized during the
    initial feature checks. Also, SEV-SNP feature detection will rely on
    EFI helper functions to scan the EFI config table for the Confidential
    Computing blob, and so would need to be implemented at least partially
    in C.

    Currently set_sev_encryption_mask() is used to initialize the
    sev_status and sme_me_mask globals that advertise what SEV/SME features
    are available in a guest. Rename it to sev_enable() to better reflect
    that (SME is only enabled in the case of SEV guests in the
    boot/compressed kernel), and move it to just after the stage1 #VC
    handler is set up so that it can be used to initialize SEV-SNP as well
    in future patches.

    While at it, re-implement it as C code so that all SEV feature
    detection can be better consolidated with upcoming SEV-SNP feature
    detection, which will also be in C.

    The 32-bit entry path remains unchanged, as it never relied on the
    set_sev_encryption_mask() initialization to begin with, possibly due to
    the normal rva() helper for accessing globals only being usable by code
    in .head.text. Either way, 32-bit entry for SEV-SNP would likely only
    be supported for non-EFI boot paths, and so wouldn't rely on existing
    EFI helper functions, and so could be handled by a separate/simpler
    32-bit initializer in the future if needed.

    Signed-off-by: Michael Roth <michael.roth@amd.com>
    Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
    ---
    arch/x86/boot/compressed/head_64.S | 32 ++++++++++--------
    arch/x86/boot/compressed/mem_encrypt.S | 36 ---------------------
    arch/x86/boot/compressed/misc.h | 4 +--
    arch/x86/boot/compressed/sev.c | 45 ++++++++++++++++++++++++++
    4 files changed, 66 insertions(+), 51 deletions(-)

    diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
    index 572c535cf45b..20b174adca51 100644
    --- a/arch/x86/boot/compressed/head_64.S
    +++ b/arch/x86/boot/compressed/head_64.S
    @@ -191,9 +191,8 @@ SYM_FUNC_START(startup_32)
    /*
    * Mark SEV as active in sev_status so that startup32_check_sev_cbit()
    * will do a check. The sev_status memory will be fully initialized
    - * with the contents of MSR_AMD_SEV_STATUS later in
    - * set_sev_encryption_mask(). For now it is sufficient to know that SEV
    - * is active.
    + * with the contents of MSR_AMD_SEV_STATUS later via sev_enable(). For
    + * now it is sufficient to know that SEV is active.
    */
    movl $1, rva(sev_status)(%ebp)
    1:
    @@ -447,6 +446,23 @@ SYM_CODE_START(startup_64)
    call load_stage1_idt
    popq %rsi

    +#ifdef CONFIG_AMD_MEM_ENCRYPT
    + /*
    + * Now that the stage1 interrupt handlers are set up, #VC exceptions from
    + * CPUID instructions can be properly handled for SEV-ES guests.
    + *
    + * For SEV-SNP, the CPUID table also needs to be set up in advance of any
    + * CPUID instructions being issued, so go ahead and do that now via
    + * sev_enable(), which will also handle the rest of the SEV-related
    + * detection/setup to ensure that has been done in advance of any dependent
    + * code.
    + */
    + pushq %rsi
    + movq %rsi, %rdi /* real mode address */
    + call sev_enable
    + popq %rsi
    +#endif
    +
    /*
    * paging_prepare() sets up the trampoline and checks if we need to
    * enable 5-level paging.
    @@ -559,17 +575,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
    shrq $3, %rcx
    rep stosq

    -/*
    - * If running as an SEV guest, the encryption mask is required in the
    - * page-table setup code below. When the guest also has SEV-ES enabled
    - * set_sev_encryption_mask() will cause #VC exceptions, but the stage2
    - * handler can't map its GHCB because the page-table is not set up yet.
    - * So set up the encryption mask here while still on the stage1 #VC
    - * handler. Then load stage2 IDT and switch to the kernel's own
    - * page-table.
    - */
    pushq %rsi
    - call set_sev_encryption_mask
    call load_stage2_idt

    /* Pass boot_params to initialize_identity_maps() */
    diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S
    index c1e81a848b2a..311d40f35a4b 100644
    --- a/arch/x86/boot/compressed/mem_encrypt.S
    +++ b/arch/x86/boot/compressed/mem_encrypt.S
    @@ -187,42 +187,6 @@ SYM_CODE_END(startup32_vc_handler)
    .code64

    #include "../../kernel/sev_verify_cbit.S"
    -SYM_FUNC_START(set_sev_encryption_mask)
    -#ifdef CONFIG_AMD_MEM_ENCRYPT
    - push %rbp
    - push %rdx
    -
    - movq %rsp, %rbp /* Save current stack pointer */
    -
    - call get_sev_encryption_bit /* Get the encryption bit position */
    - testl %eax, %eax
    - jz .Lno_sev_mask
    -
    - bts %rax, sme_me_mask(%rip) /* Create the encryption mask */
    -
    - /*
    - * Read MSR_AMD64_SEV again and store it to sev_status. Can't do this in
    - * get_sev_encryption_bit() because this function is 32-bit code and
    - * shared between 64-bit and 32-bit boot path.
    - */
    - movl $MSR_AMD64_SEV, %ecx /* Read the SEV MSR */
    - rdmsr
    -
    - /* Store MSR value in sev_status */
    - shlq $32, %rdx
    - orq %rdx, %rax
    - movq %rax, sev_status(%rip)
    -
    -.Lno_sev_mask:
    - movq %rbp, %rsp /* Restore original stack pointer */
    -
    - pop %rdx
    - pop %rbp
    -#endif
    -
    - xor %rax, %rax
    - ret
    -SYM_FUNC_END(set_sev_encryption_mask)

    .data

    diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
    index 16ed360b6692..23e0e395084a 100644
    --- a/arch/x86/boot/compressed/misc.h
    +++ b/arch/x86/boot/compressed/misc.h
    @@ -120,12 +120,12 @@ static inline void console_init(void)
    { }
    #endif

    -void set_sev_encryption_mask(void);
    -
    #ifdef CONFIG_AMD_MEM_ENCRYPT
    +void sev_enable(struct boot_params *bp);
    void sev_es_shutdown_ghcb(void);
    extern bool sev_es_check_ghcb_fault(unsigned long address);
    #else
    +static inline void sev_enable(struct boot_params *bp) { }
    static inline void sev_es_shutdown_ghcb(void) { }
    static inline bool sev_es_check_ghcb_fault(unsigned long address)
    {
    diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
    index 28bcf04c022e..8eebdf589a90 100644
    --- a/arch/x86/boot/compressed/sev.c
    +++ b/arch/x86/boot/compressed/sev.c
    @@ -204,3 +204,48 @@ void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code)
    else if (result != ES_RETRY)
    sev_es_terminate(GHCB_SEV_ES_GEN_REQ);
    }
    +
    +static inline u64 rd_sev_status_msr(void)
    +{
    + unsigned long low, high;
    +
    + asm volatile("rdmsr" : "=a" (low), "=d" (high) :
    + "c" (MSR_AMD64_SEV));
    +
    + return ((high << 32) | low);
    +}
    +
    +void sev_enable(struct boot_params *bp)
    +{
    + unsigned int eax, ebx, ecx, edx;
    +
    + /* Check for the SME/SEV support leaf */
    + eax = 0x80000000;
    + ecx = 0;
    + native_cpuid(&eax, &ebx, &ecx, &edx);
    + if (eax < 0x8000001f)
    + return;
    +
    + /*
    + * Check for the SME/SEV feature:
    + * CPUID Fn8000_001F[EAX]
    + * - Bit 0 - Secure Memory Encryption support
    + * - Bit 1 - Secure Encrypted Virtualization support
    + * CPUID Fn8000_001F[EBX]
    + * - Bits 5:0 - Pagetable bit position used to indicate encryption
    + */
    + eax = 0x8000001f;
    + ecx = 0;
    + native_cpuid(&eax, &ebx, &ecx, &edx);
    + /* Check whether SEV is supported */
    + if (!(eax & BIT(1)))
    + return;
    +
    + /* Set the SME mask if this is an SEV guest. */
    + sev_status = rd_sev_status_msr();
    +
    + if (!(sev_status & MSR_AMD64_SEV_ENABLED))
    + return;
    +
    + sme_me_mask = BIT_ULL(ebx & 0x3f);
    +}
    --
    2.25.1
    \
     
     \ /
      Last update: 2021-12-10 16:45    [W:3.221 / U:0.212 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site