lkml.org 
[lkml]   [2021]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
From
Date
On 17.11.21 06:38, Jayesh Choudhary wrote:
> Disable mcasp nodes 0-2 because several required properties
> are not present in the dtsi file as they are board specific.
> These nodes can be enabled via an overlay whenever required.
>
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index 65da226847f4..c9407ed67866 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -731,3 +731,15 @@
> &icssg2_mdio {
> status = "disabled";
> };
> +
> +&mcasp0 {
> + status = "disabled";
> +};
> +
> +&mcasp1 {
> + status = "disabled";
> +};
> +
> +&mcasp2 {
> + status = "disabled";
> +};
>

Acked-by: Jan Kiszka <jan.kiszka@siemens.com>

Sorry for the delay.

Jan

--
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux

\
 
 \ /
  Last update: 2021-12-10 08:11    [W:0.046 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site