lkml.org 
[lkml]   [2021]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 09/13] arm64: dts: qcom: sm8450: add interconnect nodes
From
Hi Vinod,

On 9.12.21 12:35, Vinod Koul wrote:
> And the various interconnect nodes found in SM8450 SoC and use it for
> UFS controller.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 80 ++++++++++++++++++++++++++++
> 1 file changed, 80 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 9556d2fc46e0..f75de777f6ea 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/clock/qcom,gcc-sm8450.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interconnect/qcom,sm8450.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>
> / {
> @@ -573,6 +574,61 @@ uart7: serial@99c000 {
> };
> };
>
> + config_noc: interconnect@1500000 {
> + compatible = "qcom,sm8450-config-noc";
> + reg = <0 0x01500000 0 0x1c000>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect@1580000 {
> + compatible = "qcom,sm8450-mc-virt";
> + reg = <0 0x01580000 0 0x1000>;

Is there really a register space for this noc?

> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + system_noc: interconnect@1680000 {
> + compatible = "qcom,sm8450-system-noc";
> + reg = <0 0x01680000 0 0x1e200>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + pcie_noc: interconnect@16c0000 {
> + compatible = "qcom,sm8450-pcie-anoc";
> + reg = <0 0x016c0000 0 0xe280>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre1_noc: interconnect@16e0000 {
> + compatible = "qcom,sm8450-aggre1-noc";
> + reg = <0 0x016e0000 0 0x1c080>;
> + #interconnect-cells = <1>;
> + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre2_noc: interconnect@1700000 {
> + compatible = "qcom,sm8450-aggre2-noc";
> + reg = <0 0x01700000 0 0x31080>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
> + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&rpmhcc RPMH_IPA_CLK>;
> + };
> +
> + mmss_noc: interconnect@1740000 {
> + compatible = "qcom,sm8450-mmss-noc";
> + reg = <0 0x01740000 0 0x1f080>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> tcsr_mutex: hwlock@1f40000 {
> compatible = "qcom,tcsr-mutex";
> reg = <0x0 0x01f40000 0x0 0x40000>;
> @@ -816,6 +872,13 @@ rpmhcc: clock-controller {
> };
> };
>
> + gem_noc: interconnect@19100000 {
> + compatible = "qcom,sm8450-gem-noc";
> + reg = <0 0x19100000 0 0xbb800>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> ufs_mem_hc: ufshc@1d84000 {
> compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
> "jedec,ufs-2.0";
> @@ -832,6 +895,9 @@ ufs_mem_hc: ufshc@1d84000 {
>
> iommus = <&apps_smmu 0xe0 0x0>;
>
> + interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
> + interconnect-names = "ufs-ddr", "cpu-ufs";
> clock-names =
> "core_clk",
> "bus_aggr_clk",
> @@ -887,6 +953,20 @@ ufs_mem_phy_lanes: lanes@1d87400 {
> #clock-cells = <0>;
> };
> };
> +
> + nsp_noc: interconnect@320c0000 {
> + compatible = "qcom,sm8450-nsp-noc";
> + reg = <0 0x320c0000 0 0x10000>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + lpass_ag_noc: interconnect@3c40000 {

Nit: This should move up, if we want to order them by node address.

> + compatible = "qcom,sm8450-lpass-ag-noc";
> + reg = <0 0x3c40000 0 0x17200>;
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> };

I don't see a DT node for clk_virt, are you planning to add this later?

Thanks,
Georgi

\
 
 \ /
  Last update: 2021-12-10 10:38    [W:0.171 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site