lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 17/25] x86/sgx: Support complete page removal
Date
The SGX2 page removal flow was introduced in previous patch and is
as follows:
1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
using the ioctl introduced in previous patch.
2) Approve the page removal by running ENCLU[EACCEPT] from within
the enclave.
3) Initiate actual page removal using the new ioctl introduced here.

Support the final step of the SGX2 page removal flow with a new ioctl.
With this ioctl the user specifies a page range that should
be removed. At this time all pages in the provided range should have
the SGX_PAGE_TYPE_TRIM page type and the ioctl will fail with EPERM
(Operation not permitted) when it encounters a page that does not have
the correct type. Page removal can fail on any page within the
provided range. Support partial success by returning the number of pages
that were successfully removed.

Since actual page removal will succeed even if ENCLU[EACCEPT] was not
run from within the enclave the ENCLU[EMODPR] instruction with RWX
permissions is used as a no-op mechanism to ensure ENCLU[EACCEPT] was
successfully run from within the enclave before the enclave page is
removed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
arch/x86/include/uapi/asm/sgx.h | 21 +++++
arch/x86/kernel/cpu/sgx/ioctl.c | 159 ++++++++++++++++++++++++++++++++
2 files changed, 180 insertions(+)

diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
index f70caccd166c..6648ded960f8 100644
--- a/arch/x86/include/uapi/asm/sgx.h
+++ b/arch/x86/include/uapi/asm/sgx.h
@@ -33,6 +33,8 @@ enum sgx_page_flags {
_IOWR(SGX_MAGIC, 0x05, struct sgx_page_modp)
#define SGX_IOC_PAGE_MODT \
_IOWR(SGX_MAGIC, 0x06, struct sgx_page_modt)
+#define SGX_IOC_PAGE_REMOVE \
+ _IOWR(SGX_MAGIC, 0x07, struct sgx_page_remove)

/**
* struct sgx_enclave_create - parameter structure for the
@@ -115,6 +117,25 @@ struct sgx_page_modt {
__u64 count;
};

+/**
+ * struct sgx_page_remove - parameters for the %SGX_IOC_PAGE_REMOVE ioctl
+ * @offset: starting page offset (page aligned relative to enclave base
+ * address defined in SECS)
+ * @length: length of memory (multiple of the page size)
+ * @count: bytes successfully changed (multiple of page size)
+ *
+ * Regular (PT_REG) or TCS (PT_TCS) can be removed from an initialized
+ * enclave if the system supports SGX2. First, the %SGX_IOC_PAGE_MODT ioctl
+ * should be used to change the page type to PT_TRIM. After that succeeds
+ * ENCLU[EACCEPT] should be run from within the enclave and then can this
+ * ioctl be used to complete the page removal.
+ */
+struct sgx_page_remove {
+ __u64 offset;
+ __u64 length;
+ __u64 count;
+};
+
struct sgx_enclave_run;

/**
diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
index a952d608ab35..d11da6c53b26 100644
--- a/arch/x86/kernel/cpu/sgx/ioctl.c
+++ b/arch/x86/kernel/cpu/sgx/ioctl.c
@@ -1146,6 +1146,162 @@ static long sgx_ioc_page_modt(struct sgx_encl *encl, void __user *arg)
return ret;
}

+/**
+ * sgx_page_remove - Remove trimmed pages from SGX enclave
+ * @encl: Enclave to which the pages belong
+ * @params: Checked parameters from user on which pages need to be removed
+ *
+ * Final step of the flow removing pages from an initialized enclave. The
+ * complete flow is:
+ * 1) User changes the type of the pages to be removed to %SGX_PAGE_TYPE_TRIM
+ * using the %SGX_IOC_PAGE_MODT ioctl.
+ * 2) User approves the page removal by running ENCLU[EACCEPT] from within
+ * the enclave.
+ * 3) User initiates actual page removal using the %SGX_IOC_PAGE_REMOVE
+ * ioctl that is handled here.
+ *
+ * First remove any page table entries pointing to the page and then proceed
+ * with the actual removal of the enclave page and data in support of it.
+ *
+ * VA pages are not affected by this removal. It is thus possible that the
+ * enclave may end up with more VA pages than needed to support all its
+ * pages.
+ *
+ * Return:
+ * - 0: Success.
+ * - -errno: Otherwise.
+ */
+static long sgx_page_remove(struct sgx_encl *encl,
+ struct sgx_page_remove *params)
+{
+ struct sgx_encl_page *entry;
+ struct sgx_secinfo secinfo;
+ unsigned long addr;
+ unsigned long c;
+ void *epc_virt;
+ int ret;
+
+ memset(&secinfo, 0, sizeof(secinfo));
+ secinfo.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_X;
+
+ for (c = 0 ; c < params->length; c += PAGE_SIZE) {
+ addr = encl->base + params->offset + c;
+
+ mutex_lock(&encl->lock);
+
+ entry = sgx_encl_load_page(encl, addr);
+ if (IS_ERR(entry)) {
+ ret = -EFAULT;
+ goto out_unlock;
+ }
+
+ if (entry->type != SGX_PAGE_TYPE_TRIM) {
+ ret = -EPERM;
+ goto out_unlock;
+ }
+
+ /*
+ * ENCLS[EMODPR] is a no-op instruction used to inform if
+ * ENCLU[EACCEPT] was run from within the enclave. If
+ * ENCLS[EMODPR] is run with RWX on a trimmed page that is
+ * not yet accepted then it will return
+ * %SGX_PAGE_NOT_MODIFIABLE, after the trimmed page is
+ * accepted the instruction will encounter a page fault.
+ */
+ epc_virt = sgx_get_epc_virt_addr(entry->epc_page);
+ ret = __emodpr(&secinfo, epc_virt);
+ if (!encls_faulted(ret) || ENCLS_TRAPNR(ret) != X86_TRAP_PF) {
+ ret = -EPERM;
+ goto out_unlock;
+ }
+
+ if (sgx_unmark_page_reclaimable(entry->epc_page)) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ /*
+ * Do not keep encl->lock because of dependency on
+ * mmap_lock acquired in sgx_zap_enclave_ptes().
+ */
+ mutex_unlock(&encl->lock);
+
+ sgx_zap_enclave_ptes(encl, addr);
+
+ mutex_lock(&encl->lock);
+
+ sgx_encl_free_epc_page(entry->epc_page);
+ encl->secs_child_cnt--;
+ entry->epc_page = NULL;
+ xa_erase(&encl->page_array, PFN_DOWN(entry->desc));
+ sgx_encl_shrink(encl, NULL);
+ kfree(entry);
+
+ mutex_unlock(&encl->lock);
+ }
+
+ ret = 0;
+ goto out;
+
+out_unlock:
+ mutex_unlock(&encl->lock);
+out:
+ params->count = c;
+
+ return ret;
+}
+
+/**
+ * sgx_ioc_page_remove() - handler for %SGX_IOC_PAGE_REMOVE
+ * @encl: an enclave pointer
+ * @arg: userspace pointer to a struct sgx_page_remove instance
+ *
+ * Return:
+ * - 0: Success
+ * - -errno: Otherwise
+ */
+static long sgx_ioc_page_remove(struct sgx_encl *encl, void __user *arg)
+{
+ struct sgx_page_remove params;
+ long ret;
+
+ /*
+ * Ensure that there is a chance the request could succeed:
+ * (1) SGX2 is required
+ * (2) Pages can only be removed from an initialized enclave
+ */
+ if (!(cpu_feature_enabled(X86_FEATURE_SGX2)))
+ return -ENODEV;
+
+ if (!test_bit(SGX_ENCL_INITIALIZED, &encl->flags))
+ return -EINVAL;
+
+ /*
+ * Obtain parameters from user and perform sanity checks.
+ */
+ if (copy_from_user(&params, arg, sizeof(params)))
+ return -EFAULT;
+
+ if (!IS_ALIGNED(params.offset, PAGE_SIZE))
+ return -EINVAL;
+
+ if (!params.length || params.length & (PAGE_SIZE - 1))
+ return -EINVAL;
+
+ if (params.offset + params.length - PAGE_SIZE >= encl->size)
+ return -EINVAL;
+
+ if (params.count)
+ return -EINVAL;
+
+ ret = sgx_page_remove(encl, &params);
+
+ if (copy_to_user(arg, &params, sizeof(params)))
+ return -EFAULT;
+
+ return ret;
+}
+
long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
{
struct sgx_encl *encl = filep->private_data;
@@ -1173,6 +1329,9 @@ long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
case SGX_IOC_PAGE_MODT:
ret = sgx_ioc_page_modt(encl, (void __user *)arg);
break;
+ case SGX_IOC_PAGE_REMOVE:
+ ret = sgx_ioc_page_remove(encl, (void __user *)arg);
+ break;
default:
ret = -ENOIOCTLCMD;
break;
--
2.25.1
\
 
 \ /
  Last update: 2021-12-01 20:24    [W:0.496 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site