lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 00/12] io_uring zerocopy send
On 12/1/21 17:57, David Ahern wrote:
> On 12/1/21 8:32 AM, Pavel Begunkov wrote:
>>
>> Sure. First, for dummy I set mtu by hand, not sure can do it from
>> the userspace, can I? Without it __ip_append_data() falls into
>> non-zerocopy path.
>>
[...]
>>
>> modprobe dummy numdummies=1
>> ip link set dummy0 up
>
>
> No change is needed to the dummy driver:
> ip li add dummy0 type dummy
> ip li set dummy0 up mtu 65536

awesome, thanks!

>> # force requests to <dummy_ip_addr> go through the dummy device
>> ip route add <dummy_ip_addr> dev dummy0
>
> that command is not necessary.
>
>>
>>
>> With dummy I was just sinking the traffic to the dummy device,
>> was good enough for me. Omitting "taskset" and "nice":
>>
>> send-zc -4 -D <dummy_ip_addr> -t 10 udp
>>
>> Similarly with msg_zerocopy:
>>
>> <kernel>/tools/testing/selftests/net/msg_zerocopy -4 -p 6666 -D
>> <dummy_ip_addr> -t 10 -z udp
>
> I get -ENOBUFS with '-z' and any local address.

Ah, right. Citing from Willem's MSG_ZEROCOPY letter:

"
Notification skbuffs are allocated from optmem. For sockets that
cannot effectively coalesce notifications, the optmem max may need
to be increased to avoid hitting -ENOBUFS:

sysctl -w net.core.optmem_max=1048576
"


>> For loopback testing, as zerocopy is not allowed for it as Willem
>> explained in
>> the original MSG_ZEROCOPY cover-letter, I used a hack to bypass it:
>>
>> diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
>> index ebb12a7d386d..42df33b175ce 100644
>> --- a/include/linux/skbuff.h
>> +++ b/include/linux/skbuff.h
>> @@ -2854,9 +2854,7 @@ static inline int skb_orphan_frags(struct sk_buff
>> *skb, gfp_t gfp_mask)
>>  /* Frags must be orphaned, even if refcounted, if skb might loop to rx
>> path */
>>  static inline int skb_orphan_frags_rx(struct sk_buff *skb, gfp_t gfp_mask)
>>  {
>> -    if (likely(!skb_zcopy(skb)))
>> -        return 0;
>> -    return skb_copy_ubufs(skb, gfp_mask);
>> +    return skb_orphan_frags(skb, gfp_mask);
>>  }
>>
>
> that is the key change that is missing in your repo. All local traffic
> (traffic to the address on a dummy device falls into this comment) goes
> through loopback. That's just the way Linux works. If you look at the
> dummy driver, it's xmit function just drops packets if any actually make
> it there.

Not at all, the measurements were done without this patch. In case it
may shed some light, attaching a fresh flamegraph, same 115761.6 MB/s

btw, why a dummy device would ever go through loopback? It doesn't
seem to make sense, though may be missing something.


>>> mileage varies quite a bit.
>>
>> Interesting, any brief notes on the setup and the results? Dummy
>
> VM on Chromebook. I just cloned your repos, built, install and test. As
> mentioned above, the skb_orphan_frags_rx change is missing from your
> repo and that is the key to your reported performance gains.
>

--
Pavel Begunkov[unhandled content-type:image/svg+xml]
\
 
 \ /
  Last update: 2021-12-01 20:12    [W:0.819 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site