lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 3/7] dt-bindings: net: Document moca PHY interface
From
Date
On 12/1/21 6:33 AM, Rob Herring wrote:
> On Tue, 30 Nov 2021 20:12:24 -0800, Florian Fainelli wrote:
>> MoCA (Multimedia over Coaxial) is used by the internal GENET/MOCA cores
>> and will be needed in order to convert GENET to YAML in subsequent
>> changes.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>> Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
>> 1 file changed, 1 insertion(+)
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/patch/1561996
>
>
> ethernet@0,2: fixed-link:speed:0:0: 2500 is not one of [10, 100, 1000]
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dt.yaml
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dt.yaml
>
> ethernet@17020000: phy-handle: [[36], [37]] is too long
> arch/arm64/boot/dts/apm/apm-mustang.dt.yaml
>
> ethernet@30000: fixed-link:speed:0:0: 2500 is not one of [10, 100, 1000]
> arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dt.yaml
> arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dt.yaml

These are all pre-existing warnings, but we should be documenting speed
2500 in ethernet-controller.yaml, so I will add a patch towards that end.

The one for apm-mustand.dts however I am not sure how to best resolve
since it looks like there was an intention to provide two Ethernet PHYs
and presumably have the firmware prune the one that is not in use. I
don't even know if that platform is supported mainline anymore.
--
Florian

\
 
 \ /
  Last update: 2021-12-01 18:16    [W:0.138 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site