lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/5] pinctrl: qcom: Move chip specific functions to right files
From
Date

On 12/1/2021 8:37 PM, Srinivas Kandagatla wrote:
Thanks for clarification Srini!!
>
> On 01/12/2021 14:33, Srinivasa Rao Mandadapu wrote:
>>>
>>>
>>>> +enum lpass_lpi_functions {
>>>> +    LPI_MUX_dmic1_clk,
>>>> +    LPI_MUX_dmic1_data,
>>>> +    LPI_MUX_dmic2_clk,
>>>> +    LPI_MUX_dmic2_data,
>>>> +    LPI_MUX_dmic3_clk,
>>>> +    LPI_MUX_dmic3_data,
>>>> +    LPI_MUX_i2s1_clk,
>>>> +    LPI_MUX_i2s1_data,
>>>> +    LPI_MUX_i2s1_ws,
>>>> +    LPI_MUX_i2s2_clk,
>>>> +    LPI_MUX_i2s2_data,
>>>> +    LPI_MUX_i2s2_ws,
>>>> +    LPI_MUX_qua_mi2s_data,
>>>> +    LPI_MUX_qua_mi2s_sclk,
>>>> +    LPI_MUX_qua_mi2s_ws,
>>>> +    LPI_MUX_swr_rx_clk,
>>>> +    LPI_MUX_swr_rx_data,
>>>> +    LPI_MUX_swr_tx_clk,
>>>> +    LPI_MUX_swr_tx_data,
>>>> +    LPI_MUX_wsa_swr_clk,
>>>> +    LPI_MUX_wsa_swr_data,
>>>> +    LPI_MUX_gpio,
>>>> +    LPI_MUX__,
>>>> +};
>>>> +
>>>> +static const unsigned int gpio0_pins[] = { 0 };
>>>> +static const unsigned int gpio1_pins[] = { 1 };
>>>> +static const unsigned int gpio2_pins[] = { 2 };
>>>> +static const unsigned int gpio3_pins[] = { 3 };
>>>> +static const unsigned int gpio4_pins[] = { 4 };
>>>> +static const unsigned int gpio5_pins[] = { 5 };
>>>> +static const unsigned int gpio6_pins[] = { 6 };
>>>> +static const unsigned int gpio7_pins[] = { 7 };
>>>> +static const unsigned int gpio8_pins[] = { 8 };
>>>> +static const unsigned int gpio9_pins[] = { 9 };
>>>> +static const unsigned int gpio10_pins[] = { 10 };
>>>> +static const unsigned int gpio11_pins[] = { 11 };
>>>> +static const unsigned int gpio12_pins[] = { 12 };
>>>> +static const unsigned int gpio13_pins[] = { 13 };
>>> >>>
>>> to here are specific to sm8250, so it should not be in header file
>>> to start with.
>>
>> As these are common to all lpass variants.. I feel it's better to
>> keep in Header file.
>
> You realize that every include of this file will add these static
> variables to file, in this case to pinctrl-lpass-lpi.c,
> pinctrl-sm8250-lpass-lpi.c and pinctrl-sc7280-lpass-lpi.c
> so in first file(pinctrl-lpass-lpi.c) you never use those variables in
> second file (pinctrl-sm8250-lpass-lpi.c)you only use up to gpio13 and
> in third file pinctrl-sc7280-lpass-lpi.c you could use them.
>
> so its really bad idea to add static variables in header files.
>
Okay. Understood. will move it SoC specific files.
> --srini
>
>>
>> And if new pins comes in later variants, we can add them
>> incrementally, and they will not impact existing pin numbers.
>>
>> I think in upcoming variants number of pins will not decrease.
>>
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2021-12-01 16:12    [W:0.043 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site