lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [patch 09/10] PCI/MSI: Provide pci_msix_expand_vectors[_at]()
From
Hi Thomas,
On 11/26/2021 5:25 PM, Thomas Gleixner wrote:
> Provide a new interface which allows to expand the MSI-X vector space if
> the underlying irq domain implementation supports it.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> ---
> drivers/pci/msi/msi.c | 41 +++++++++++++++++++++++++++++++++++++++++
> include/linux/pci.h | 13 +++++++++++++
> 2 files changed, 54 insertions(+)
>
> --- a/drivers/pci/msi/msi.c
> +++ b/drivers/pci/msi/msi.c
> @@ -1025,6 +1025,47 @@ int pci_alloc_irq_vectors_affinity(struc
> EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity);
>
> /**
> + * pci_msix_expand_vectors_at - Expand MSI-X interrupts for a device
> + *
> + * @dev: PCI device to operate on
> + * @at: Allocate at MSI-X index. If @at == PCI_MSI_EXPAND_AUTO
> + * the function expands automatically after the last
Not sure why some of these changes related to PCI_MSIX_EXPAND_AUTO and
num_descs did not make it to the 'msi' branch.
Is this intentional?
> + * active index.
> + * @nvec: Number of vectors to allocate
> + *
> + * Expand the MSI-X vectors of a device after an initial enablement and
> + * allocation.
> + *
> + * Return: 0 if the allocation was successful, an error code otherwise.
> + */
> +int pci_msix_expand_vectors_at(struct pci_dev *dev, unsigned int at, unsigned int nvec)
> +{
> + struct msi_device_data *md = dev->dev.msi.data;
> + struct msi_range range = { .ndesc = nvec, };
> + unsigned int max_vecs;
> + int ret;
> +
> + if (!pci_msi_enable || !dev || !dev->msix_enabled || !md)
> + return -ENOTSUPP;
> +
> + if (!pci_msi_domain_supports_expand(dev))
> + return -ENOTSUPP;
> +
> + max_vecs = pci_msix_vec_count(dev);
> + if (!nvec || nvec > max_vecs)
> + return -EINVAL;
> +
> + range.first = at == PCI_MSIX_EXPAND_AUTO ? md->num_descs : at;
> +
> + if (range.first >= max_vecs || nvec > max_vecs - range.first)
> + return -ENOSPC;
> +
> + ret = msix_setup_interrupts(dev, dev->msix_base, &range, NULL, NULL, true);
> + return ret <= 0 ? ret : -ENOSPC;;
> +}
> +EXPORT_SYMBOL_GPL(pci_msix_expand_vectors_at);
> +
I am having trouble fully comprehending how this expansion scheme would
work..

For instance, say:
1. Driver requests for 5 vectors:
pci_enable_msix_range(dev, NULL, 5, 5)
=>num_descs = 5

2. Driver frees vectors at index 1,2:
range = {1, 2, 2};
pci_msi_teardown_msi_irqs(dev, range)
=>num_descs = 3; Current active vectors are at index: 0, 3, 4

3. Driver requests for 3 more vectors using the new API:
pci_msix_expand_vectors(dev, 3)
=>range.first = 3 => It will try to allocate index 3-5, but we already
have 3,4 active?
Ideally, we would want index 1,2 and 5 to be allocated for this request
right?

Could you please let me know what I am missing?

With the 'range' approach, the issue is that we are trying to allocate
contiguous indexes. Perhaps, we also need to check if all the indexes in
the requested range are available,
if not, find a contiguous range large enough to accommodate the request.
But there will be fragmentation issues if we choose to go with this way...

I had a version of the dynamic MSI-X patch series (which never got sent
out). For the expansion, I had the following:
pci_add_msix_irq_vector(pdev): On each invocation, add 1 MSI-X vector to
the device and return the msi-x index assigned by the kernel (using a
bitmap)
Correspondingly, pci_free_msix_irq_vector(pdev, irq) frees all the
allocated resources associated with MSI-X interrupt with Linux IRQ
number 'irq'.
I had issues when trying to dynamically allocate more than 1 interrupt
because I didn't have a clean way to communicate to the driver what
indexes were assigned in the current allocation.

-Megha
>

\
 
 \ /
  Last update: 2021-12-02 02:08    [W:0.175 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site