lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 04/16] arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer
From

On 01.12.2021 21:45, Stephen Boyd wrote:
> Quoting Konrad Dybcio (2021-11-30 11:59:03)
>> On 30/11/2021 03:05, Stephen Boyd wrote:
>>> Quoting Konrad Dybcio (2021-11-13 17:27:43)
>>>> Arch timer runs at 19.2 MHz. Specify the rate in the timer node.
>>>>
>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/sm8350.dtsi | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>>> index a30ba3193d84..60866a20a55c 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
>>>> @@ -2484,5 +2484,6 @@ timer {
>>>> <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>> + clock-frequency = <19200000>;
>>> Does the firmware not set the frequency properly?
>> It does on my device on the current firmware version (it wouldn't really
>> boot if it didn't, no?),
>>
>> but who knows if it always will, or if it always has been..
>>
>>
>> It's present in downstream too, so I reckon it does not hurt to have it
>> here too, even
>>
>> for completeness-of-describing-the-machine-properly sake.
>>
> No. We don't want dts files to have this. The property is only there to
> workaround bad firmware that doesn't set the frequency. Please drop this
> patch.

After looking at it again, I see I was indeed wrong, and so was this patch.

Sorry, and green light for dropping..


Konrad

\
 
 \ /
  Last update: 2021-12-02 01:01    [W:1.425 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site