lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dt-bindings: bus: imx-weim: add words about continuous bclk
On Wed, Nov 24, 2021 at 08:55:42PM +0300, Ivan Bornyakov wrote:
> Document continuous Burst Clock option. With this option Burst Clock, if
> enabled, will output continuous clock, otherwise Burst Clock will output
> clock only when necessary.

Missing S-o-b. checkpatch.pl will tell you this.

> ---
> Documentation/devicetree/bindings/bus/imx-weim.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
> index 1b1d1c5c21ea..e7f502070d77 100644
> --- a/Documentation/devicetree/bindings/bus/imx-weim.txt
> +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
> @@ -48,6 +48,11 @@ Optional properties:
> devices, the presence of this property indicates that
> the weim bus should operate in Burst Clock Mode.
>
> + - fsl,continuous-burst-clk Make Burst Clock to output continuous clock.
> + Without this option Burst Clock will output clock
> + only when necessary. This takes effect only if
> + "fsl,burst-clk-enable" is set.
> +
> Timing property for child nodes. It is mandatory, not optional.
>
> - fsl,weim-cs-timing: The timing array, contains timing values for the
> --
> 2.32.0
>
>
>

\
 
 \ /
  Last update: 2021-12-01 23:18    [W:0.115 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site