lkml.org 
[lkml]   [2021]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 1/4] crypto: ccp - Fix SEV_INIT error logging on init
On Tue, Nov 9, 2021 at 9:27 AM Sean Christopherson <seanjc@google.com> wrote:
>
> On Tue, Nov 02, 2021, Peter Gonda wrote:
> > Currently only the firmware error code is printed. This is incomplete
> > and also incorrect as error cases exists where the firmware is never
> > called and therefore does not set an error code. This change zeros the
> > firmware error code in case the call does not get that far and prints
> > the return code for non firmware errors.
> >
> > Signed-off-by: Peter Gonda <pgonda@google.com>
> > Reviewed-by: Marc Orr <marcorr@google.com>
> > Acked-by: David Rientjes <rientjes@google.com>
> > Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
> > Cc: Tom Lendacky <thomas.lendacky@amd.com>
> > Cc: Brijesh Singh <brijesh.singh@amd.com>
> > Cc: Marc Orr <marcorr@google.com>
> > Cc: Joerg Roedel <jroedel@suse.de>
> > Cc: Herbert Xu <herbert@gondor.apana.org.au>
> > Cc: David Rientjes <rientjes@google.com>
> > Cc: John Allen <john.allen@amd.com>
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: Paolo Bonzini <pbonzini@redhat.com>
> > Cc: linux-crypto@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > ---
> > drivers/crypto/ccp/sev-dev.c | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
> > index 2ecb0e1f65d8..ec89a82ba267 100644
> > --- a/drivers/crypto/ccp/sev-dev.c
> > +++ b/drivers/crypto/ccp/sev-dev.c
> > @@ -1065,7 +1065,7 @@ void sev_pci_init(void)
> > {
> > struct sev_device *sev = psp_master->sev_data;
> > struct page *tmr_page;
> > - int error, rc;
> > + int error = 0, rc;
>
> Wouldn't it be more appropriate to use something the PSP can't return, e.g. -1?
> '0' is SEV_RET_SUCCESS, which is quite misleading, e.g. the below error message
> will print
>
> SEV: failed to INIT error 0, rc -16
>
> which a bit head scratching without looking at the code. AFAICT, the PSP return
> codes aren't intrinsically hex, so printing error as a signed demical and thus
>
> SEV: failed to INIT error -1, rc -16
>
> would be less confusing.
>
> And IMO requiring the caller to initialize error is will be neverending game of
> whack-a-mole. E.g. sev_ioctl() fails to set "error" in the userspace structure,
> and literally every function exposed via include/linux/psp-sev.h has this same
> issue. Case in point, the retry path fails to re-initialize "error" and will
> display stale information if the second sev_platform_init() fails without reaching
> the PSP.

OK I can update __sev_platform_init_locked() to set error to -1. That
seems pretty reasonable. Tom, is that OK with you?

>
> rc = sev_platform_init(&error);
> if (rc && (error == SEV_RET_SECURE_DATA_INVALID)) {
> /*
> * INIT command returned an integrity check failure
> * status code, meaning that firmware load and
> * validation of SEV related persistent data has
> * failed and persistent state has been erased.
> * Retrying INIT command here should succeed.
> */
> dev_dbg(sev->dev, "SEV: retrying INIT command");
> rc = sev_platform_init(&error); <------ error may or may not be set
> }
>
> Ideally, error wouldn't be an output param and instead would be squished into the
> true return value, but that'd required quite the refactoring, and might yield ugly
> code generation on non-64-bit architectures (does this code support those?).
>
> As a minimal step toward sanity, sev_ioctl(), __sev_platform_init_locked(), and
> __sev_do_cmd_locked() should initialize the incoming error. Long term, sev-dev
> really needs to either have well-defined API for when "error" is meaningful, or
> ensure the pointer is initialized in all paths.

These comments seem fine to me. But I'll refrain from updating
anything here since this seems out-of-scope of this series. Happy to
discuss further and work on that if Tom is interested in those
refactors too.

>
> E.g.
>
> diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
> index ec89a82ba267..549686a1e812 100644
> --- a/drivers/crypto/ccp/sev-dev.c
> +++ b/drivers/crypto/ccp/sev-dev.c
> @@ -149,6 +149,9 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret)
> unsigned int reg, ret = 0;
> int buf_len;
>
> + if (psp_ret)
> + *psp_ret = -1;
> +
> if (!psp || !psp->sev_data)
> return -ENODEV;
>
> @@ -192,9 +195,6 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret)
> /* wait for command completion */
> ret = sev_wait_cmd_ioc(sev, &reg, psp_timeout);
> if (ret) {
> - if (psp_ret)
> - *psp_ret = 0;
> -
> dev_err(sev->dev, "sev command %#x timed out, disabling PSP\n", cmd);
> psp_dead = true;
>
> @@ -243,6 +243,9 @@ static int __sev_platform_init_locked(int *error)
> struct sev_device *sev;
> int rc = 0;
>
> + if (error)
> + *error = -1;
> +
> if (!psp || !psp->sev_data)
> return -ENODEV;
>
> @@ -838,6 +841,8 @@ static long sev_ioctl(struct file *file, unsigned int ioctl, unsigned long arg)
> if (input.cmd > SEV_MAX)
> return -EINVAL;
>
> + input.error = -1;
> +
> mutex_lock(&sev_cmd_mutex);
>
> switch (input.cmd) {
>
> > if (!sev)
> > return;
> > @@ -1104,7 +1104,8 @@ void sev_pci_init(void)
> > }
> >
> > if (rc) {
> > - dev_err(sev->dev, "SEV: failed to INIT error %#x\n", error);
> > + dev_err(sev->dev, "SEV: failed to INIT error %#x, rc %d\n",
> > + error, rc);
> > return;
> > }
> >
> > --
> > 2.33.1.1089.g2158813163f-goog
> >

\
 
 \ /
  Last update: 2021-11-09 17:47    [W:0.113 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site