lkml.org 
[lkml]   [2021]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/8] KVM: nVMX: Clean up x2APIC MSR handling for L2
Date
From: Sean Christopherson <seanjc@google.com>

Clean up the x2APIC MSR bitmap intereption code for L2, which is the last
holdout of open coded bitmap manipulations. Freshen up the SDM/PRM
comment, rename the function to make it abundantly clear the funky
behavior is x2APIC specific, and explain _why_ vmcs01's bitmap is ignored
(the previous comment was flat out wrong for x2APIC behavior).

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/vmx/nested.c | 53 +++++++++++----------------------------
arch/x86/kvm/vmx/vmx.h | 8 ++++++
2 files changed, 22 insertions(+), 39 deletions(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index c569a135ca48..341c50816822 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -525,44 +525,19 @@ static int nested_vmx_check_tpr_shadow_controls(struct kvm_vcpu *vcpu,
}

/*
- * If a msr is allowed by L0, we should check whether it is allowed by L1.
- * The corresponding bit will be cleared unless both of L0 and L1 allow it.
+ * For x2APIC MSRs, ignore the vmcs01 bitmap. L1 can enable x2APIC without L1
+ * itself utilizing x2APIC. All MSRs were previously set to be intercepted,
+ * only the "disable intercept" case needs to be handled.
*/
-static void nested_vmx_disable_intercept_for_msr(unsigned long *msr_bitmap_l1,
- unsigned long *msr_bitmap_nested,
- u32 msr, int type)
+static void nested_vmx_disable_intercept_for_x2apic_msr(unsigned long *msr_bitmap_l1,
+ unsigned long *msr_bitmap_l0,
+ u32 msr, int type)
{
- int f = sizeof(unsigned long);
+ if (type & MSR_TYPE_R && !vmx_test_msr_bitmap_read(msr_bitmap_l1, msr))
+ vmx_clear_msr_bitmap_read(msr_bitmap_l0, msr);

- /*
- * See Intel PRM Vol. 3, 20.6.9 (MSR-Bitmap Address). Early manuals
- * have the write-low and read-high bitmap offsets the wrong way round.
- * We can control MSRs 0x00000000-0x00001fff and 0xc0000000-0xc0001fff.
- */
- if (msr <= 0x1fff) {
- if (type & MSR_TYPE_R &&
- !test_bit(msr, msr_bitmap_l1 + 0x000 / f))
- /* read-low */
- __clear_bit(msr, msr_bitmap_nested + 0x000 / f);
-
- if (type & MSR_TYPE_W &&
- !test_bit(msr, msr_bitmap_l1 + 0x800 / f))
- /* write-low */
- __clear_bit(msr, msr_bitmap_nested + 0x800 / f);
-
- } else if ((msr >= 0xc0000000) && (msr <= 0xc0001fff)) {
- msr &= 0x1fff;
- if (type & MSR_TYPE_R &&
- !test_bit(msr, msr_bitmap_l1 + 0x400 / f))
- /* read-high */
- __clear_bit(msr, msr_bitmap_nested + 0x400 / f);
-
- if (type & MSR_TYPE_W &&
- !test_bit(msr, msr_bitmap_l1 + 0xc00 / f))
- /* write-high */
- __clear_bit(msr, msr_bitmap_nested + 0xc00 / f);
-
- }
+ if (type & MSR_TYPE_W && !vmx_test_msr_bitmap_write(msr_bitmap_l1, msr))
+ vmx_clear_msr_bitmap_write(msr_bitmap_l0, msr);
}

static inline void enable_x2apic_msr_intercepts(unsigned long *msr_bitmap)
@@ -631,7 +606,7 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
/*
* To keep the control flow simple, pay eight 8-byte writes (sixteen
* 4-byte writes on 32-bit systems) up front to enable intercepts for
- * the x2APIC MSR range and selectively disable them below.
+ * the x2APIC MSR range and selectively toggle those relevant to L2.
*/
enable_x2apic_msr_intercepts(msr_bitmap_l0);

@@ -650,17 +625,17 @@ static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
}
}

- nested_vmx_disable_intercept_for_msr(
+ nested_vmx_disable_intercept_for_x2apic_msr(
msr_bitmap_l1, msr_bitmap_l0,
X2APIC_MSR(APIC_TASKPRI),
MSR_TYPE_R | MSR_TYPE_W);

if (nested_cpu_has_vid(vmcs12)) {
- nested_vmx_disable_intercept_for_msr(
+ nested_vmx_disable_intercept_for_x2apic_msr(
msr_bitmap_l1, msr_bitmap_l0,
X2APIC_MSR(APIC_EOI),
MSR_TYPE_W);
- nested_vmx_disable_intercept_for_msr(
+ nested_vmx_disable_intercept_for_x2apic_msr(
msr_bitmap_l1, msr_bitmap_l0,
X2APIC_MSR(APIC_SELF_IPI),
MSR_TYPE_W);
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 83a14b61c80f..86c093da0d63 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -400,6 +400,14 @@ static inline void vmx_set_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr,

void vmx_update_cpu_dirty_logging(struct kvm_vcpu *vcpu);

+/*
+ * Note, early Intel manuals have the write-low and read-high bitmap offsets
+ * the wrong way round. The bitmaps control MSRs 0x00000000-0x00001fff and
+ * 0xc0000000-0xc0001fff. The former (low) uses bytes 0-0x3ff for reads and
+ * 0x800-0xbff for writes. The latter (high) uses 0x400-0x7ff for reads and
+ * 0xc00-0xfff for writes. MSRs not covered by either of the ranges always
+ * VM-Exit.
+ */
#define __BUILD_VMX_MSR_BITMAP_HELPER(rtype, action, bitop, access, base) \
static inline rtype vmx_##action##_msr_bitmap_##access(unsigned long *bitmap, \
u32 msr) \
--
2.31.1
\
 
 \ /
  Last update: 2021-11-09 17:29    [W:0.100 / U:2.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site