lkml.org 
[lkml]   [2021]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 2/8] leds: add function to configure hardware controlled LED
On Tue, Nov 09, 2021 at 04:01:03AM +0100, Marek Behún wrote:
> Hello Ansuel,
>
> On Tue, 9 Nov 2021 03:26:02 +0100
> Ansuel Smith <ansuelsmth@gmail.com> wrote:
>
> > Add hw_control_configure helper to configure how the LED should work in
> > hardware mode. The function require to support the particular trigger and
> > will use the passed flag to elaborate the data and apply the
> > correct configuration. This function will then be used by the trigger to
> > request and update hardware configuration.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> > Documentation/leds/leds-class.rst | 25 ++++++++++++++++++++
> > include/linux/leds.h | 39 +++++++++++++++++++++++++++++++
> > 2 files changed, 64 insertions(+)
> >
> > diff --git a/Documentation/leds/leds-class.rst b/Documentation/leds/leds-class.rst
> > index 645940b78d81..efd2f68c46a7 100644
> > --- a/Documentation/leds/leds-class.rst
> > +++ b/Documentation/leds/leds-class.rst
> > @@ -198,6 +198,31 @@ With HARDWARE_CONTROLLED blink_mode hw_control_status/start/stop is optional
> > and any software only trigger will reject activation as the LED supports only
> > hardware mode.
> >
> > +A trigger once he declared support for hardware controlled blinks, will use the function
> > +hw_control_configure() provided by the driver to check support for a particular blink mode.
> > +This function passes as the first argument (flag) a u32 flag.
> > +The second argument (cmd) of hw_control_configure() method can be used to do various
> > +operations for the specific blink mode. We currently support ENABLE, DISABLE, READ, ZERO
> > +and SUPPORTED to enable, disable, read the state of the blink mode, ask the LED
> > +driver if it does supports the specific blink mode and to reset any blink mode active.
> > +
> > +In ENABLE/DISABLE hw_control_configure() should configure the LED to enable/disable the
> > +requested blink mode (flag).
> > +In READ hw_control_configure() should return 0 or 1 based on the status of the requested
> > +blink mode (flag).
> > +In SUPPORTED hw_control_configure() should return 0 or 1 if the LED driver supports the
> > +requested blink mode (flags) or not.
> > +In ZERO hw_control_configure() should return 0 with success operation or error.
> > +
> > +The unsigned long flag is specific to the trigger and change across them. It's in the LED
> > +driver interest know how to elaborate this flag and to declare support for a
> > +particular trigger. For this exact reason explicit support for the specific
> > +trigger is mandatory or the driver returns -EOPNOTSUPP if asked to enter offload mode
> > +with a not supported trigger.
> > +If the driver returns -EOPNOTSUPP on hw_control_configure(), the trigger activation will
> > +fail as the driver doesn't support that specific offload trigger or doesn't know
> > +how to handle the provided flags.
> > +
> > Known Issues
> > ============
> >
> > diff --git a/include/linux/leds.h b/include/linux/leds.h
> > index cf0c6005c297..00bc4d6ed7ca 100644
> > --- a/include/linux/leds.h
> > +++ b/include/linux/leds.h
> > @@ -73,6 +73,16 @@ enum led_blink_modes {
> > SOFTWARE_HARDWARE_CONTROLLED,
> > };
> >
> > +#ifdef CONFIG_LEDS_HARDWARE_CONTROL
> > +enum blink_mode_cmd {
> > + BLINK_MODE_ENABLE, /* Enable the hardware blink mode */
> > + BLINK_MODE_DISABLE, /* Disable the hardware blink mode */
> > + BLINK_MODE_READ, /* Read the status of the hardware blink mode */
> > + BLINK_MODE_SUPPORTED, /* Ask the driver if the hardware blink mode is supported */
> > + BLINK_MODE_ZERO, /* Disable any hardware blink active */
> > +};
> > +#endif
>
> this is a strange proposal for the API.
>
> Anyway, led_classdev already has the blink_set() method, which is documented as
> /*
> * Activate hardware accelerated blink, delays are in milliseconds
> * and if both are zero then a sensible default should be chosen.
> * The call should adjust the timings in that case and if it can't
> * match the values specified exactly.
> * Deactivate blinking again when the brightness is set to LED_OFF
> * via the brightness_set() callback.
> */
> int (*blink_set)(struct led_classdev *led_cdev,
> unsigned long *delay_on,
> unsigned long *delay_off);
>
> So we already have a method to set hardware blkinking, we don't need
> another one.
>
> Marek

But that is about hardware blink, not a LED controlled by hardware based
on some rules/modes.
Doesn't really match the use for the hardware control.
Blink_set makes the LED blink contantly at the declared delay.
The blink_mode_cmd are used to request stuff to a LED in hardware mode.

Doesn't seem correct to change/enhance the blink_set function with
something that would do something completely different.

--
Ansuel

\
 
 \ /
  Last update: 2021-11-09 15:23    [W:0.086 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site