lkml.org 
[lkml]   [2021]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
From
Date
Hi Mirela,

Thanks for patch, tested OK on my side:

Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Tested-by: Hugues Fruchet <hugues.fruchet@st.com>

BR,
Hugues.
>
>
> -----Original Message-----
> From: Mirela Rabulea (OSS) <mirela.rabulea@oss.nxp.com>
> Sent: lundi 1 novembre 2021 20:53
> To: slongerbeam@gmail.com; mchehab@kernel.org; Hugues FRUCHET <hugues.fruchet@st.com>; jacopo+renesas@jmondi.org
> Cc: guoniu.zhou@nxp.com; manish.bajaj@nxp.com; robert.chiras@nxp.com; xavier.roumegue@oss.nxp.com; linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; linux-imx@nxp.com; Mirela Rabulea <mirela.rabulea@nxp.com>
> Subject: [PATCH] media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
>
> From: Mirela Rabulea <mirela.rabulea@nxp.com>
>
> In ov5640_set_fmt, pending_fmt_change will always be false, because the sensor format is saved before comparing it with the previous format:
> fmt = &sensor->fmt;...
> *fmt = *mbus_fmt;...
> if (mbus_fmt->code != sensor->fmt.code)
> sensor->pending_fmt_change = true;
> This causes the sensor to capture with the previous pixelcode.
>
> Also, changes might happen even for V4L2_SUBDEV_FORMAT_TRY, so fix that.
>
> Basically, revert back to the state before commit 071154499193 ("media: ov5640: Fix set format regression") as it was more clear, and then update format even when pixelcode does not change, as resolution might change.
>
> Fixes: 071154499193 ("media: ov5640: Fix set format regression")
> Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged")
> Fixes: fb98e29ff1ea5 ("media: ov5640: fix mode change regression")
>
> Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
> ---
> drivers/media/i2c/ov5640.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index ddbd71394db3..db5a19babe67 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -2293,7 +2293,6 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
> struct ov5640_dev *sensor = to_ov5640_dev(sd);
> const struct ov5640_mode_info *new_mode;
> struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> - struct v4l2_mbus_framefmt *fmt;
> int ret;
>
> if (format->pad != 0)
> @@ -2311,12 +2310,10 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
> if (ret)
> goto out;
>
> - if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> - fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> - else
> - fmt = &sensor->fmt;
> -
> - *fmt = *mbus_fmt;
> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> + *v4l2_subdev_get_try_format(sd, sd_state, 0) = *mbus_fmt;
> + goto out;
> + }
>
> if (new_mode != sensor->current_mode) {
> sensor->current_mode = new_mode;
> @@ -2325,6 +2322,9 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
> if (mbus_fmt->code != sensor->fmt.code)
> sensor->pending_fmt_change = true;
>
> + /* update format even if code is unchanged, resolution might change */
> + sensor->fmt = *mbus_fmt;
> +
> __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
> ov5640_calc_pixel_rate(sensor));
> out:
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-11-09 15:20    [W:0.060 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site