lkml.org 
[lkml]   [2021]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] serial: sh-sci: Add support to deassert/assert reset line
Date
On RZ/G2L SoC we need to explicitly deassert the reset line
for the device to work, use this opportunity to deassert/assert
reset line in sh-sci driver.

This patch adds support to read the "resets" property (if available)
from DT and perform deassert/assert when required.

Also, propagate the error to the caller of sci_parse_dt() instead of
returning NULL in case of failure.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2
* deassert/assert reset line if available on all SoC's
* Updated commit message
---
drivers/tty/serial/sh-sci.c | 47 ++++++++++++++++++++++++++++++-------
1 file changed, 39 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 89ee43061d3a..7aced84d2f04 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -37,6 +37,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include <linux/scatterlist.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
@@ -3203,23 +3204,53 @@ static const struct of_device_id of_sci_match[] = {
};
MODULE_DEVICE_TABLE(of, of_sci_match);

+static void sci_reset_control_assert(void *data)
+{
+ reset_control_assert(data);
+}
+
static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
unsigned int *dev_id)
{
struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id;
+ struct reset_control *rstc;
struct plat_sci_port *p;
struct sci_port *sp;
const void *data;
- int id;
+ int id, ret;

if (!IS_ENABLED(CONFIG_OF) || !np)
- return NULL;
+ return ERR_PTR(-EINVAL);
+
+ of_id = of_match_device(of_sci_match, &pdev->dev);
+ if (!of_id)
+ return ERR_PTR(-EINVAL);

- data = of_device_get_match_data(&pdev->dev);
+ rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rstc)) {
+ dev_err(&pdev->dev, "failed to get reset ctrl %ld\n", PTR_ERR(rstc));
+ return ERR_PTR(PTR_ERR(rstc));
+ }
+
+ ret = reset_control_deassert(rstc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to deassert reset %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ ret = devm_add_action_or_reset(&pdev->dev, sci_reset_control_assert, rstc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register assert devm action, %d\n",
+ ret);
+ return ERR_PTR(ret);
+ }
+
+ data = of_id->data;

p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
if (!p)
- return NULL;
+ return ERR_PTR(-ENOMEM);

/* Get the line number from the aliases node. */
id = of_alias_get_id(np, "serial");
@@ -3227,11 +3258,11 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
id = ffz(sci_ports_in_use);
if (id < 0) {
dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
if (id >= ARRAY_SIZE(sci_ports)) {
dev_err(&pdev->dev, "serial%d out of range\n", id);
- return NULL;
+ return ERR_PTR(-EINVAL);
}

sp = &sci_ports[id];
@@ -3318,8 +3349,8 @@ static int sci_probe(struct platform_device *dev)

if (dev->dev.of_node) {
p = sci_parse_dt(dev, &dev_id);
- if (p == NULL)
- return -EINVAL;
+ if (IS_ERR(p))
+ return PTR_ERR(p);
} else {
p = dev->dev.platform_data;
if (p == NULL) {
--
2.17.1
\
 
 \ /
  Last update: 2021-11-09 13:18    [W:0.060 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site