Messages in this thread | | | From | Martin Kaistra <> | Subject | [PATCH v2 0/7] Add PTP support for BCM53128 switch | Date | Tue, 9 Nov 2021 10:50:02 +0100 |
| |
Hi,
this series adds PTP support to the b53 DSA driver for the BCM53128 switch using the BroadSync HD feature.
As there seems to be only one filter (either by Ethertype or DA) for timestamping incoming packets, only L2 is supported.
To be able to use the timecounter infrastructure with a counter that wraps around at a non-power of two point, patch 2 adds support for such a custom point. Alternatively I could fix up the delta every time a wrap-around occurs in the driver itself, but this way it can also be useful for other hardware.
v1 -> v2: fix compiling each patch with W=1 C=1 fix compiling when NET_DSA or B53 = m return error on request for too broad filters use aux_work for overflow check fix signature of b53_port_txtstamp() for !CONFIG_B53_PTP rework broadsync hd register definitions add and use register definitions for multiport control remove setting default value for B53_BROADSYNC_TIMEBASE_ADJ simplify initialisation of dev->ptp_clock_info fix pskb_may_pull() for different tag lengths add unlikely() to check for status frames add pointer to b53_port_hwtstamp from dp->priv to simplify access from tag_brcm.c
Ideally, for the B53=m case, I would have liked to include the PTP support in the b53_module itself, however I couldn't find a way to do that without renaming either the common source file or the module, which I didn't want to do.
Instead, b53_ptp will be allowed as a loadable module, but only if b53_common is also a module, otherwise it will be built-in.
This is v2, the previous version can be found here: https://lore.kernel.org/netdev/20211104133204.19757-1-martin.kaistra@linutronix.de/
Thanks, Martin
Kurt Kanzenbach (1): net: dsa: b53: Add BroadSync HD register definitions
Martin Kaistra (6): net: dsa: b53: Move struct b53_device to include/linux/dsa/b53.h timecounter: allow for non-power of two overflow net: dsa: b53: Add PHC clock support net: dsa: b53: Add logic for RX timestamping net: dsa: b53: Add logic for TX timestamping net: dsa: b53: Expose PTP timestamping ioctls to userspace
drivers/net/dsa/b53/Kconfig | 8 + drivers/net/dsa/b53/Makefile | 4 + drivers/net/dsa/b53/b53_common.c | 21 ++ drivers/net/dsa/b53/b53_priv.h | 90 +------- drivers/net/dsa/b53/b53_ptp.c | 366 +++++++++++++++++++++++++++++++ drivers/net/dsa/b53/b53_ptp.h | 67 ++++++ drivers/net/dsa/b53/b53_regs.h | 71 ++++++ include/linux/dsa/b53.h | 144 ++++++++++++ include/linux/timecounter.h | 3 + kernel/time/timecounter.c | 3 + net/dsa/tag_brcm.c | 81 ++++++- 11 files changed, 760 insertions(+), 98 deletions(-) create mode 100644 drivers/net/dsa/b53/b53_ptp.c create mode 100644 drivers/net/dsa/b53/b53_ptp.h create mode 100644 include/linux/dsa/b53.h
-- 2.20.1
| |