lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 0/2] arm/arm64: dts: Enable more network hardware
Date
Hi All,

On 18/10/21 2:12 pm, Chris Packham wrote:
> This series enables the Switch and 2.5G Ethernet port on the CN9130-CRB. The
> changes are based on the Marvell SDK.
>
> Note Gregory has already picked up the 2.5G Ethernet patch from v1 so I've not
> included it in v2 of this series.
>
> Also note that if anyone tries out the SFP+ port on a complete CRB shipped from
> Marvell the chassis prevents the ejector from working so the SFP will get
> stuck. Taking the board out of the chassis allows the SFP to be
> insterted/removed.
Gentle ping on this series. I've had a review from Andrew for patch 2
but haven't heard anything else.
> Chris Packham (2):
> arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRB
> arm/arm64: dts: Add MV88E6393X to CN9130-CRB device tree
>
> arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 139 ++++++++++++++++++++
> 1 file changed, 139 insertions(+)
>
\
 
 \ /
  Last update: 2021-11-09 01:55    [W:0.093 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site