lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] KVM: nVMX: Handle dynamic MSR intercept toggling
On Mon, Nov 08, 2021, Sean Christopherson wrote:
> On Mon, Nov 08, 2021, Vitaly Kuznetsov wrote:
> > Sean Christopherson <seanjc@google.com> writes:
> > > @@ -6749,7 +6686,9 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
> > > * If the L02 MSR bitmap does not intercept the MSR, then we need to
> > > * save it.
> > > */
> > > - if (unlikely(!msr_write_intercepted(vcpu, MSR_IA32_SPEC_CTRL)))
> > > + if (unlikely(cpu_has_vmx_msr_bitmap() &&

There's another bug lurking here. If vmcs12 disables MSR bitmaps, then KVM also
disables MSR bitmaps in vmcs02, ergo checking if MSR bitmaps are supported is
incorrect. KVM needs to check if MSR bitmaps are enabled for the current VMCS.

> > > + vmx_test_msr_bitmap_write(vmx->loaded_vmcs->msr_bitmap,
> > > + MSR_IA32_SPEC_CTRL)))
>
> Ugh, I inverted the check, '1' == intercept. IIRC, I open coded the intercept
> check because SPEC_CTRL is really the only case where should be reading _only_
> the current VMCS's MSR bitmap.
>
> I'll spin a new version of the series and test with SPEC_CTRL disabled in a VM,
> and maybe revist my reasoning for this.
>
> Thanks!
>
> > > vmx->spec_ctrl = native_read_msr(MSR_IA32_SPEC_CTRL);
> >
> > I smoke-tested this patch by running (unrelated) selftests when I tried
> > to put in into my 'Enlightened MSR Bitmap v4' series and my dmesg got
> > flooded with:
> >
> > [ 87.210214] unchecked MSR access error: RDMSR from 0x48 at rIP: 0xffffffffc04e0284 (native_read_msr+0x4/0x30 [kvm_intel])
> > [ 87.210325] Call Trace:
> > [ 87.210355] vmx_vcpu_run+0xcc7/0x12b0 [kvm_intel]
> > [ 87.210405] ? vmx_prepare_switch_to_guest+0x138/0x1f0 [kvm_intel]
> > [ 87.210466] vcpu_enter_guest+0x98c/0x1380 [kvm]
> > [ 87.210631] ? vmx_vcpu_put+0x2e/0x1f0 [kvm_intel]
> > [ 87.210678] ? vmx_vcpu_load+0x21/0x60 [kvm_intel]
> > [ 87.210729] kvm_arch_vcpu_ioctl_run+0xdf/0x580 [kvm]
> > [ 87.210844] kvm_vcpu_ioctl+0x274/0x660 [kvm]
> > [ 87.210950] __x64_sys_ioctl+0x83/0xb0
> > [ 87.210996] do_syscall_64+0x3b/0x90
> > [ 87.211039] entry_SYSCALL_64_after_hwframe+0x44/0xae
> > [ 87.211093] RIP: 0033:0x7f6ef7f9a307
> > [ 87.211134] Code: 44 00 00 48 8b 05 69 1b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 1b 2d 00 f7 d8 64 89 01 48
> > [ 87.211293] RSP: 002b:00007ffcacfb3b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> > [ 87.211367] RAX: ffffffffffffffda RBX: 0000000000a2f300 RCX: 00007f6ef7f9a307
> > [ 87.211434] RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000007
> > [ 87.211500] RBP: 0000000000000000 R08: 000000000040e769 R09: 0000000000000000
> > [ 87.211559] R10: 0000000000a2f001 R11: 0000000000000246 R12: 0000000000a2d010
> > [ 87.211622] R13: 0000000000a2d010 R14: 0000000000402a15 R15: 00000000ffff0ff0
> > [ 87.212520] Call Trace:
> > [ 87.212597] vmx_vcpu_run+0xcc7/0x12b0 [kvm_intel]
> > [ 87.212683] ? vmx_prepare_switch_to_guest+0x138/0x1f0 [kvm_intel]
> > [ 87.212789] vcpu_enter_guest+0x98c/0x1380 [kvm]
> > [ 87.213059] ? vmx_vcpu_put+0x2e/0x1f0 [kvm_intel]
> > [ 87.213141] ? schedule+0x44/0xa0
> > [ 87.213200] kvm_arch_vcpu_ioctl_run+0xdf/0x580 [kvm]
> > [ 87.213428] kvm_vcpu_ioctl+0x274/0x660 [kvm]
> > [ 87.213633] __x64_sys_ioctl+0x83/0xb0
> > [ 87.213705] do_syscall_64+0x3b/0x90
> > [ 87.213766] entry_SYSCALL_64_after_hwframe+0x44/0xae
> > ...
> >
> > this was an old 'E5-2603 v3' CPU. Any idea what's wrong?

\
 
 \ /
  Last update: 2021-11-08 23:06    [W:0.246 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site